Studi Evaluasi Pengelolaan Limbah B3 di Galangan PT. X

Bunga Ervina Rahma Berliana Putri; Muhammad Faisal Fadhil

Authors

Bunga Ervina Rahma Berliana Putri Universitas Pembangunan Nasional “Veteran” Jawa Timur Author
Muhammad Faisal Fadhil Universitas Pembangunan Nasional “Veteran” Jawa Timur Author

Keywords:

limbah B3, pengelolaan, peraturan, galangan kapal, TPSB3

Abstract

The shipyard of PT. X generates a huge amount of hazardous trash from ship repair activities, such as sandblasting waste, spent oil, used paint cans, and cleaning cloths. The purpose of this study is to classify and appraise B3 waste management operations, as well as to evaluate their execution. Data were gathered from observations, measurements, and interviews with the person in charge of Hazardous Waste Storage at the shipyard of PT. X. This study uses four stages in its implementation method, namely data collection, data processing and analysis, withdrawal, and provision of recommendations. Then the data will be compared with the applicable regulations. The average percentage of scoring was 73.375% with the achievement of "GOOD". However, the aspect of B3 waste storage needs to be improved because it got a low score of 56% with the achievement category of "FAIR". The same thing also happened in the aspect of packaging and container of B3 waste which only got a score of 37.5% with the achievement category of "POOR". With low scores for these aspects, it will result in the risk of environmental pollution, endanger the health and safety of workers, and can damage the company's reputation because it has violated existing regulations. Therefore, it is necessary to make improvements to improve the suitability of Hazardous waste management at PT. X based on applicable regulations.

References

[1] Syafrudin, “Evaluasi Sistem Pengelolaan Limbah Padat B3 PT. Indofarma,” Teknik, vol. 29, no. 3, pp. 214–219, 2020.

[2] Y. Yurnalisdel, “Analisis Pengelolaan Limbah Bahan Berbahaya dan Beracun (B3) di Indonesia,” J. Syntax Admiration, vol. 4, no. 2, pp. 201–208, 2023, doi: 10.46799/jsa.v4i2.562.

[3] T. Industri, F. Sains, and U. B. Darma, “Pengolahan Limbah Bahan Berbahaya Dan Beracun ( B3 ) Di PT . Tanjung Enem Lestari Pulp And Paper,” vol. 4, no. 6, pp. 470–478, 2024, doi: 10.59395/altifani.v4i6.587.

[4] N. H. Anggarini, M. Stefanus, and P. Aplikasi, “Pengelolaan Dan Karakterisasi Limbah B3,” pp. 41–49, 2014.

[5] A. Sabela and R. H. A. Putri, “Perencanaan Desain TPS Limbah B3 Di Industri Galangan Kapal PT. XXX,” Environ. Eng. J. ITATS, vol. 3, no. 2, pp. 164–169, 2023, doi: 10.31284/j.envitats.2023.v3i2.4580.

[6] R. Maulidya Permana and N. Hendrasarie, “Identifikasi Tempat Penyimpanan Sementara Limbah B3 Industri Penggilingan Baja Sidoarjo,” Serambi Eng., vol. 9, no. 3, pp. 9390–9397, 2024.

[7] A. F. Malayadi, “Karakteristik dan sistem pengelolaan limbah bahan berbahaya dan beracun laboratorium universitas hasanuddin kota makassar,” 2017.

[8] Dewantara, Faldi Achmad. Perancangan Tempat Penyimpanan Sementara (Tps) Limbah Bahan Berbahaya Dan Beracun (B3) Pada Galangan Kapal X. Diss. Politeknik Perkapalan Negeri Surabaya, 2017.

[9] Nurlina, “Toxic and Hazardous Waste (B3) Management At Pt. Pal Indonesia (Persero),” Indones. J. Public Heal., vol. 16, no. 3, pp. 449–460, 2021, doi: 10.20473/ijph.v16i3.2021.449-460.

[10] K. T. Utami and S. Syafrudin, “Pengelolaan Limbah Bahan Berbahaya Dan Beracun (B3) Studi Kasuspt. Holcim Indonesia, Tbk Narogong Plant,” J. Presipitasi Media Komun. dan Pengemb. Tek. Lingkung., vol. 15, no. 2, p. 127, 2018, doi: 10.14710/presipitasi.v15i2.127-132.

[11] M. A. Nandito, “Identifikasi Pengelolaan Limbah Berbahaya Dan Beracun (B3) Padat Klinik Gigi Di Kota Yogyakarta,” no. September, pp. 1–12, 2018, [Online]. Available: https://dspace.uii.ac.id/bitstream/handle/123456789/11019/08 jurnal TA. pdf.pdf?sequence=21&isAllowed=y

[12] H. R. Adinda Larasati, “Evaluasi Pengelolaan Limbah Medis,” Eval. Pengelolaan Limbah Medis, vol. 20, no. 17, pp. 1021–1030, 2022.

[13] S. Aji and D. Hesti Wardhani, “Pengolahan Limbah Bahan Berbahaya dan Beracun (B3) dengan Teknologi Insinerasi pada Fasilitas Pengelolaan Limbah Terpadu (FPLT) Kawasan Medan,” Jpii, vol. 2, no. 1, pp. 17–25, 2024, [Online]. Available: https://doi.org/10.14710/jpii.2024.24112

[14] Rezasyah Alifiadi and Agus Slamet, “Utilization of Sandblasting Waste as an Alternative Material for Paving Blocks,” J. Multidisiplin Madani, vol. 2, no. 12, pp. 4399–4407, 2022, doi: 10.55927/mudima.v2i12.1911.

[15] A. Nursabrina, T. Joko, and O. Septiani, “Kondisi Pengelolaan Limbah B3 Industri Di Indonesia Dan Potensi Dampaknya: Studi Literatur,” J. Ris. Kesehat. Poltekkes Depkes Bandung, vol. 13, no. 1, pp. 80–90, 2021, doi: 10.34011/juriskesbdg.v13i1.1841.