Optimalisasi Efisiensi Operasional Melalui Inovasi Proses di Industri Daur Ulang Plastik UMKM

Rahmi; Mahdi; Syaifuddin  Yana; Jen  Surya; Alfian  Nurhadi

Authors

Rahmi Universitas Serambi Mekkah Author
Mahdi Universitas Serambi Mekkah Author
Syaifuddin Yana Universitas Serambi Mekkah Author
Jen Surya Universitas Serambi Mekkah Author
Alfian Nurhadi Universitas Serambi Mekkah Translator

Keywords:

Process innovation, operational efficiency, plastic recycling, SMEs, circular economy

Abstract

This article examines the role of process innovation in improving operational efficiency within the plastic recycling industry, particularly among small and medium enterprises (SMEs). Operational efficiency serves as a key factor in ensuring both sustainability and profitability amid growing environmental concerns and the global shift toward a circular economy. Through an extensive literature review of international sources, this study highlights how the adoption of technologies such as sensor-based automatic sorting systems, energy-efficient washing, the Internet of Things (IoT), and supply chain digitalization can reduce production costs, enhance product quality, and increase production capacity. However, findings also indicate that several challenges persist, including limited investment capital, low technological literacy, infrastructural disparities, and regulatory uncertainty. Therefore, the success of process innovation in the recycling industry depends heavily on collaborative support from governments, research institutions, industry associations, and NGOs. This paper contributes both theoretically and practically by proposing a conceptual framework that links process innovation, operational efficiency, and sustainability, serving as a foundation for strengthening SMEs toward an inclusive and competitive green industry

Author Biographies

Rahmi, Universitas Serambi Mekkah

Prodi Akuntansi FE USM
Mahdi, Universitas Serambi Mekkah

Koresponden Author, Prodi Akuntansi FE USM
Syaifuddin Yana, Universitas Serambi Mekkah

Prodi Manajemen FE USM
Jen Surya, Universitas Serambi Mekkah

Prodi Akuntansi FE USM
Alfian Nurhadi, Universitas Serambi Mekkah

Mahasiswa Prodi Akuntansi FE USM

References

[1] K. I. Olatayo, P. T. Mativenga, and A. L. Marnewick, “Plastic value chain and performance metric framework for optimal recycling,” J. Ind. Ecol., vol. 27, no. 2, pp. 601–623, 2023.

[2] S. Ikhbar, N. Nelly, M. Maksalmina, C. Amni, A. Arsyad, and A. A. Fansuri, “Strategi Pengelolaan Operasional untuk Meningkatkan Keuntungan dan Mengurangi Pengeluaran dalam Industri Daur Ulang Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[3] S. Kumar, D. Sajwan, D. Sharma, and V. Krishnan, “Reductive Upcycling of Polyolefins, Polyesters and Mixed Plastic Wastes to Valuable Chemicals: Bridging Chemical Catalysis With Plastic Waste Management,” Adv. Sustain. Syst., vol. 9, no. 4, p. 2500003, 2025.

[4] C. Rusmina, M. Mawardi, M. Bakri, S. Susanti, R. Radhiana, and C. A. Surayya, “Meningkatkan Daya Saing UMKM melalui Penerapan Just-in-Time dan Teknologi Sederhana,” J. Serambi Eng., vol. 10, no. 1, 2025.

[5] M. Marlina, T. M. H. A. H. Almuqaramah, C. R. Rusmina, R. Rahmi, and M. Zidane, “Analisis Profitabilitas dan Efisiensi Operasional pada Industri Perikanan Skala Kecil di Indonesia,” J. Serambi Eng., vol. 10, no. 3, 2025.

[6] R. Radhiana, M. Mukhdasir, J. Surya, N. Syamsuddin, M. Maryam, and A. Syafitri, “Pengaruh Sistem Produksi Lean terhadap Pengurangan Biaya Produksi dan Peningkatan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[7] M. Marlina, S. Sufitrayati, S. Amri, N. Syamsuddin, R. Radhiana, and R. M. Akbar, “Inovasi Operasional untuk Efisiensi Biaya dan Peningkatan Profit di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[8] M. Maryam, R. Nengsih, T. Makmur, S. Susanti, A. Arsyad, and A. R. Rahmi, “Meningkatkan Profitabilitas UMKM Pengrajin Gerabah dengan Efisiensi Keuangan dan Optimalisasi Produksi,” J. Serambi Eng., vol. 10, no. 1, 2025.

[9] C. Rusmina, Z. Zainuddin, J. Juwita, M. Marlina, and A. Jelita, “Risiko Investasi pada Inovasi Teknologi Ramah Lingkungan dalam Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 2, 2025.

[10] M. Alaghemandi, “Sustainable solutions through innovative plastic waste recycling technologies,” Sustainability, vol. 16, no. 23, p. 10401, 2024.

[11] U. Ulfia, R. Rahmi, Z. Yusuf, R. Radhiana, M. Mukhdasir, and A. Humaira, “Strategi Pemilihan Bahan Baku Daur Ulang untuk Meningkatkan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[12] OECD, “OECD Studies on SMEs and Entrepreneurship,” OECD. [Online]. Available: https://www.oecd.org/en/publications/oecd-studies-on-smes-and-entrepreneurship_20780990.html

[13] E. Macarthur and H. Heading, “How the circular economy tackles climate change,” Ellen MacArthur Found, vol. 1, pp. 1–71, 2019.

[14] J.-P. Lange, “Managing plastic waste─ sorting, recycling, disposal, and product redesign,” ACS Sustain. Chem. Eng., vol. 9, no. 47, pp. 15722–15738, 2021.

[15] S. Capuzzi and G. Timelli, “Preparation and melting of scrap in aluminum recycling: A review,” Metals (Basel)., vol. 8, no. 4, p. 249, 2018.

[16] V. Rizos et al., “Implementation of circular economy business models by small and medium-sized enterprises (SMEs): Barriers and enablers,” Sustainability, vol. 8, no. 11, p. 1212, 2016.

[17] T. K. Avordeh, A. Salifu, C. Quaidoo, and R. Opare-Boateng, “Impact of power outages: Unveiling their influence on micro, small, and medium-sized enterprises and poverty in Sub-Saharan Africa-An in-depth literature review,” Heliyon, vol. 10, no. 13, 2024.

[18] D. Kaur and N. Arora, “EPR policy adoption in the digital age: exploring barriers faced by Indian MSMEs through an IPA lens,” Soc. Responsib. J., 2025.

[19] N. Derhab and Z. Elkhwesky, “A systematic and critical review of waste management in micro, small and medium-sized enterprises: future directions for theory and practice,” Environ. Sci. Pollut. Res., vol. 30, no. 6, pp. 13920–13944, 2023.

[20] K. J. Sinha, S. Sinha, and B. J. Sinha, “Micro, Small, and Medium-Sized Enterprises (MSMEs): The significant role and challenges in Indonesia’s economy,” Int. J. Multidiscip. Res., vol. 6, no. 3, p. 20824, 2024.

[21] P. Mauliza et al., “Kendala Pemenuhan Suplai dan Permintaan Energi Terbarukan Biomassa Indonesia,” J. Serambi Eng., vol. 8, no. 3, 2023.

[22] M. K. Loo, S. Ramachandran, and R. N. Raja Yusof, “Unleashing the potential: Enhancing technology adoption and innovation for micro, small and medium-sized enterprises (MSMEs),” Cogent Econ. Financ., vol. 11, no. 2, p. 2267748, 2023.

[23] I. Jalil, M. Malahayati, S. Yana, H. Heriyana, I. Ilyas, and R. Nengsih, “Optimalisasi Proses Bisnis UMKM Kerajinan Gerabah melalui Sinergi Inovasi Pemasaran dan Manajemen Risiko Terstruktur,” J. Serambi Eng., vol. 10, no. 1, 2025.

[24] F. Hanum et al., “Strategi Ekspansi Usaha UMKM dengan Pendekatan Metoda Hybrid SWOT Analisis dan AHP,” J. Serambi Eng., vol. VIII, no. 1, pp. 4991–4999, 2023, [Online]. Available: https://ojs.serambimekkah.ac.id/index.php/jse/article/view/5675

[25] Juwita et al., “Peluang Ekspansi Energi Terbarukan Biomassa dengan Analisis SWOT,” J. Serambi Eng., vol. 8, no. 1, pp. 4947–4956, 2023.

[26] A. Sohal, A. A. Nand, P. Goyal, and A. Bhattacharya, “Developing a circular economy: An examination of SME’s role in India,” J. Bus. Res., vol. 142, pp. 435–447, 2022.

[27] T. Ahmadov, S. Durst, W. Gerstlberger, and E. Kraut, “SMEs on the way to a circular economy: insights from a multi-perspective review,” Manag. Rev. Q., vol. 75, no. 1, pp. 289–322, 2025.