Optimasi Sistem Produksi dan Manajemen Rantai Pasok dalam Mengelola Risiko Pasar pada Industri Daur Ulang Plastik

Mawardi; Nurfiani  Syamsuddin; Rahmad; Bukhari  Usman; Syafrina  Syamsuddin; Putri  Dida Nurida

Authors

Mawardi Universitas Serambi Mekkah Author
Nurfiani Syamsuddin Universitas Serambi Mekkah Author
Rahmad Universitas Jabal Ghafur , Sigli Author
Bukhari Usman Universitas Serambi Mekkah Author
Syafrina Syamsuddin Universitas Jabal Ghafur - Sigli Author
Putri Dida Nurida STIS Al Aziziyah - Sabang Author

Keywords:

production optimization; supply chain management; market risk management; plastic recycling industry; cost efficiency

Abstract

This study examines the integration of production system optimization, supply chain management, and market risk management in the plastic recycling industry within a circular economy context. Using a qualitative systematic literature review approach covering publications from 2017 to 2025, this study synthesizes findings from Scopus, Web of Science, OECD, and World Bank sources. The results indicate that production optimization strategies such as lean manufacturing, process simplification, energy efficiency, and capacity planning enhance cost efficiency and operational stability. At the same time, effective supply chain management, including reverse logistics coordination, supplier diversification, and inventory control, strengthens supply chain resilience and reduces disruption risks. Cost efficiency and supply stability increase price flexibility, which mitigates market risk exposure and supports profitability stability. The study proposes an integrative conceptual framework linking production optimization, supply chain coordination, market risk mitigation, and profitability resilience. The findings contribute to bridging operations management and risk governance literature while offering practical insights for improving competitiveness and sustainability in the plastic recycling sector.

References

[1] Organisation for Economic Co-operation and Development. Improving plastics management: trends, policy responses, and the role of international co-operation and trade. OECD Publishing, 2018.

[2] World Bank, “Plastic Waste Discharges from Rivers and Coastlines in Indonesia. Marine Plastics Series, East Asia and Pacific Region,” Int. Bank Reconstr. Dev. / World Bank, no. May, 2021.

[3] R. Radhiana, M. Mukhdasir, J. Surya, N. Syamsuddin, M. Maryam, and A. Syafitri, “Pengaruh Sistem Produksi Lean terhadap Pengurangan Biaya Produksi dan Peningkatan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[4] M. Marlina, S. Sufitrayati, S. Amri, N. Syamsuddin, R. Radhiana, and R. M. Akbar, “Inovasi Operasional untuk Efisiensi Biaya dan Peningkatan Profit di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[5] S. Ikhbar, N. Nelly, M. Maksalmina, C. Amni, A. Arsyad, and A. A. Fansuri, “Strategi Pengelolaan Operasional untuk Meningkatkan Keuntungan dan Mengurangi Pengeluaran dalam Industri Daur Ulang Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[6] Q. Gu, T. Jitpaipoon, and J. Yang, “The impact of information integration on financial performance: A knowledge-based view,” Int. J. Prod. Econ., vol. 191, pp. 221–232, 2017.

[7] C. N. Ciocoiu, C. Radu, S. E. Colesca, and A. Prioteasa, “Exploring the link between risk management and performance of MSMEs: A bibliometric review,” J. Econ. Surv., vol. 39, no. 4, pp. 1523–1552, 2025.

[8] Nizar, Muhammad, et al. "Examining the economic benefits of urban waste recycle based on zero waste concepts." 1st Aceh global conference (AGC 2018). Atlantis Press, 2019.

[9] D. Pal, R. Singh, and N. Das, “Entrepreneurship and MSMEs’ financial performance: A bibliometric analysis and future research avenues: Pal et al.,” J. Int. Entrep., pp. 1–58, 2025.

[10] Settembre-Blundo, Davide, et al. "Flexibility and resilience in corporate decision making: a new sustainability-based risk management system in uncertain times." Global Journal of Flexible Systems Management 22.Suppl 2 (2021): 107-132.

[11] W. Gleißner, “Uncertainty and resilience in strategic management: profile of a robust company,” Int. J. Risk Assess. Manag., vol. 26, no. 1, pp. 75–94, 2023.

[12] F. Hamdi, A. Ghorbel, F. Masmoudi, and L. Dupont, “Optimization of a supply portfolio in the context of supply chain risk management: literature review,” J. Intell. Manuf., vol. 29, no. 4, pp. 763–788, 2018.

[13] A. Moeuf, R. Pellerin, S. Lamouri, S. Tamayo-Giraldo, and R. Barbaray, “The industrial management of SMEs in the era of Industry 4.0,” Int. J. Prod. Res., vol. 56, no. 3, pp. 1118–1136, 2018.

[14] J. Wang, L. Zhao, and A. Huchzermeier, “Operations‐finance interface in risk management: Research evolution and opportunities,” Prod. Oper. Manag., vol. 30, no. 2, pp. 355–389, 2021.

[15] W. Chen, X. Huang, Y. Liu, and Y. Song, “Does industry integration improve the competitiveness of China’s electronic information industry?—evidence from the integration of the electronic information industry and financial industry,” Sustainability, vol. 11, no. 9, p. 2695, 2019.

[16] U. Ulfia, R. Rahmi, Z. Yusuf, R. Radhiana, M. Mukhdasir, and A. Humaira, “Strategi Pemilihan Bahan Baku Daur Ulang untuk Meningkatkan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[17] A. Chauhan, N. K. Sharma, S. Tayal, V. Kumar, and M. Kumar, “A sustainable production model for waste management with uncertain scrap and recycled material,” J. Mater. Cycles Waste Manag., vol. 24, no. 5, pp. 1797–1817, 2022.

[18] B. Tansel, “Increasing gaps between materials demand and materials recycling rates: A historical perspective for evolution of consumer products and waste quantities,” J. Environ. Manage., vol. 276, p. 111196, 2020.

[19] S. Yana and B. Badaruddin, “Pengelolaan Limbah Plastik Sebagai Upaya Pengurangan Pencemaran Lingkungan Melalui Transformasi Yang Memiliki Nilai Tambah Ekonomi,” J. Serambi Eng., vol. 2, no. 4, pp. 157–164, 2017.

[20] L. Milios, L. H. Christensen, D. McKinnon, C. Christensen, M. K. Rasch, and M. H. Eriksen, “Plastic recycling in the Nordics: A value chain market analysis,” Waste Manag., vol. 76, pp. 180–189, 2018.

[21] S. Yana, D. Mulyati, B. Badaruddin, and H. Halimatussakdiah, “Sistem Pengelolaan Limbah Plastik di Kota Lhokseumawe-Provinsi Aceh,” J. Serambi Eng., vol. 4, no. 1, pp. 400–405, 2019.

[22] P. Sambyal et al., “Plastic recycling: Challenges and opportunities,” Can. J. Chem. Eng., vol. 103, no. 6, pp. 2462–2498, 2025.

[23] M. H. Tan, M. S. Chiong, Y.-Y. Chun, K. Tsukahara, and K. Tahara, “An analysis of practices and challenges for plastic recycling industry in Malaysia,” Int. J. Autom. Technol., vol. 16, no. 6, pp. 831–837, 2022.

[24] S. Satapathy, “An analysis of barriers for plastic recycling in the Indian plastic industry,” Benchmarking An Int. J., vol. 24, no. 2, pp. 415–430, 2017.

[25] C. Rusmina, M. Mawardi, M. Bakri, S. Susanti, R. Radhiana, and C. A. Suraya, “Meningkatkan Daya Saing UMKM melalui Penerapan Just-in-Time dan Teknologi Sederhana,” J. Serambi Eng., vol. 10, no. 1, 2025.

[26] V. P. K. Sundram, A. S. Bahrin, Z. B. Abdul Munir, and A. H. Zolait, “The effect of supply chain information management and information system infrastructure: The mediating role of supply chain integration towards manufacturing performance in Malaysia,” J. Enterp. Inf. Manag., vol. 31, no. 5, pp. 751–770, 2018.

[27] D. Seth, N. Seth, and P. Dhariwal, “Application of value stream mapping (VSM) for lean and cycle time reduction in complex production environments: a case study,” Prod. Plan. Control, vol. 28, no. 5, pp. 398–419, 2017.

[28] M. Goswami and Y. Daultani, “Product quality optimization vs production capacity optimization: an analytical perspective,” Int. J. Qual. Reliab. Manag., vol. 40, no. 3, pp. 801–819, 2023.

[29] G. L. Tortorella, R. Giglio, and D. H. Van Dun, “Industry 4.0 adoption as a moderator of the impact of lean production practices on operational performance improvement,” Int. J. Oper. Prod. Manag., vol. 39, no. 6/7/8, pp. 860–886, 2019.

[30] D. H. Utku, “The evaluation and improvement of the production processes of an automotive industry company via simulation and optimization,” Sustainability, vol. 15, no. 3, p. 2331, 2023.

[31] S. Vasani and A. M. Abdulkareem, “MSME market presence and competitiveness in a global economy,” Cogent Econ. Financ., vol. 12, no. 1, p. 2416992, 2024.

[32] P. K. Behera, N. C. Sahu, and A. Mahanta, “Volatility spillover and connectedness between SME and main markets of India and China,” Asia-Pacific Financ. Mark., vol. 32, no. 4, pp. 1407–1429, 2025.

[33] M. N. Jat, M. S. S. Jajja, S. A. A. Shah, and S. Farooq, “Manufacturer’s servitization level and financial performance: the role of risk management,” J. Manuf. Technol. Manag., vol. 34, no. 1, pp. 122–146, 2023.

[34] E. Napier, S. Y. H. Liu, and J. Liu, “Adaptive strength: Unveiling a multilevel dynamic process model for organizational resilience,” J. Bus. Res., vol. 171, p. 114334, 2024.

[35] E. A. Khan, M. M. H. Chowdhury, H. M. K. Hassan, A. K. M. S. Mahmud, and M. Shamsuddoha, “Sustainable recycling management: configuration of risk factors and resilience strategies,” J. Bus. Ind. Mark., vol. 39, no. 8, pp. 1827–1844, 2024.

[36] Nizar, Muhammad, et al. "Bibliometric analysis of global research on organic waste enzymes for plastic biodegradation: Trends, microbial roles, and process optimization." Cleaner and Circular Bioeconomy 12 (2025): 100164.

[37] OECD, “Global Plastics Outlook: Economic Drivers, Environmental Impacts and Policy Options,” Glob. Plast. Outlook, p. 201, 2022, [Online]. Available: https://www.oecd-ilibrary.org/environment/global-plastics-outlook_de747aef-en

[38] X. Xu, J. Wang, C. He, X. Jiang, and Q. An, “Sewage Treatment Equipment Supply Chain Collaboration and Resilience Improvement Path Analysis: Collaborative Decision-Making, Information Sharing, Risk Management,” Sustainability, vol. 16, no. 20, p. 9031, 2024.

[39] M. Debnath, S. K. Mazumder, M. B. Hossain, A. Garai, and C. B. Illes, “Optimal base-stock inventory-management policies of cement retailers under supply-side disruptions,” Mathematics, vol. 11, no. 18, p. 3971, 2023.

[40] T. E. Saputro, G. Figueira, and B. Almada-Lobo, “Integrating supplier selection with inventory management under supply disruptions,” Int. J. Prod. Res., vol. 59, no. 11, pp. 3304–3322, 2021.

[41] Ginn, William, and Jamel Saadaoui. "Do supply chain disruptions matter for global economic conditions?." The World Economy 48.7 (2025): 1534-1551.

[42] P. Basu, D. Chatterjee, I. Ghosh, and P. K. Dan, “Lean manufacturing implementation and performance: the role of economic volatility in an emerging economy,” J. Manuf. Technol. Manag., vol. 32, no. 6, pp. 1188–1223, 2021.

[43] A. Barman, A. K. Chakraborty, S. S. Sana, and P. Banerjee, “Pricing strategy and risk-averse flexibility in sustainable supply chain: a dual-channel logistics process under reward contracts and demand uncertainty,” Glob. J. Flex. Syst. Manag., vol. 25, no. 4, pp. 733–762, 2024.

[44] N. Dormady, A. Roa-Henriquez, and A. Rose, “Economic resilience of the firm: A production theory approach,” Int. J. Prod. Econ., vol. 208, pp. 446–460, 2019.

[45] H. Parker and K. Ameen, “The role of resilience capabilities in shaping how firms respond to disruptions,” J. Bus. Res., vol. 88, pp. 535–541, 2018.

[46] C. Rusmina, Z. Zainuddin, J. Juwita, M. Marlina, and A. Jelita, “Risiko Investasi pada Inovasi Teknologi Ramah Lingkungan dalam Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 2, 2025.

[47] S. Singh, R. Raj, B. M. Dash, V. Kumar, M. Paliwal, and S. Chauhan, “Access to finance and its impact on operational efficiency of MSMEs: mediating role of entrepreneurial personality and self-efficacy,” J. Small Bus. Enterp. Dev., vol. 32, no. 3, pp. 596–619, 2025.

[48] F. Tian, G. Sošić, and L. Debo, “Manufacturers’ competition and cooperation in sustainability: Stable recycling alliances,” Manage. Sci., vol. 65, no. 10, pp. 4733–4753, 2019.

[49] M. Elyasi, B. Altan, A. Ekici, O. Ö. Özener, İ. Yanıkoğlu, and A. Dolgui, “Production planning with flexible manufacturing systems under demand uncertainty,” Int. J. Prod. Res., vol. 62, no. 1–2, pp. 157–170, 2024.