Balancing Mechanical Properties, Water Resistance, and Soil Degradability of Rice Flour/CMC-Based Biodegradable Drinking Straws

Alya Keisha Intan Chayrunisya; Qanitah Nibras Firmaniya; Srie Muljani; Luluk Edahwati; Caecilia Pujiastuti

Authors

Alya Keisha Intan Chayrunisya Universitas Pembangunan Nasional “Veteran” Jawa Timur Author
Qanitah Nibras Firmaniya Universitas Pembangunan Nasional “Veteran” Jawa Timur Author
Srie Muljani Universitas Pembangunan Nasional “Veteran” Jawa Timur Author
Luluk Edahwati Universitas Pembangunan Nasional “Veteran” Jawa Timur Author
Caecilia Pujiastuti Universitas Pembangunan Nasional “Veteran” Jawa Timur Author

Keywords:

biodegradable drinking straw, rice flour, carboxymethyl cellulose, water resistance, soil-burial degradation

Abstract

The development of biodegradable drinking straws requires a balance between mechanical integrity, flexibility, water resistance, and post-use degradability. This study investigated the effects of rice flour-to-carboxymethyl cellulose (CMC) ratio and plasticizer conditions on the functional performance of biodegradable drinking straws. Five rice flour:CMC ratios (1:3, 1.5:2.5, 2:2, 2.5:1.5, and 3:1) were combined with two plasticizers (glycerol and sorbitol) at three loadings (1.5, 2.0, and 3.0 mL), resulting in 30 formulations. The resulting straws were evaluated for tensile strength, elongation at break, water resistance, and soil-burial degradation. Tensile strength ranged from 0.588 to 3.822 MPa, with the highest value obtained at a rice flour : CMC ratio of 1:3 containing 1.5 mL sorbitol. Elongation at break ranged from 12.545 to 88.964%, with the maximum achieved at a ratio of 3:1 containing 2.0 mL glycerol, demonstrating a clear strength–flexibility trade-off. Water resistance varied from 25 to 74%, while soil-burial mass loss reached 86.2–100% after 21 days. The different formulations maximizing tensile strength, flexibility, and water resistance indicate that plasticizer performance is strongly dependent on matrix composition rather than plasticizer identity alone.

References

[1] X. He, J. Shen, M. Ma, Z. Zhang, M. Li, X. Liu, and Q. Sun, “Insights into the preparation of starch-based straws starch sources and application assessments,” Int. J. Biol. Macromol., 2025, doi: 10.1016/j.ijbiomac.2025.145034.

[2] D. Silvia, A. A. S. Budi, N. S. Marshanti, and D. S. Arumdapta, “Development of sorghum flour-based edible straws with bovine gelatin and variations in carboxymethyl cellulose concentration,” AgriHealth: J. Agri-Food, Nutr. Public Health, vol. 6, no. 2, pp. 85–99, 2025, doi: 10.20961/agrihealth.v6i2.104436.

[3] D. Jiang, N. Li, H. Huang, Z. Zhou, Y. Lu, and L. Zhong, “Preparation and properties of starch/carboxymethyl cellulose/glycerol degradable composite films,” Chem. Ind. Forest Prod., vol. 44, no. 2, pp. 94–102, 2024, doi: 10.3969/j.issn.0253-2417.2024.02.013.

[4] K. M. Tavares, A. D. Campos, M. C. Mitsuyuki, et al., “Corn and cassava starch with carboxymethyl cellulose films and its mechanical and hydrophobic properties,” Carbohydr. Polym., vol. 223, p. 115055, 2019, doi: 10.1016/j.carbpol.2019.115055.

[5] E. A. Arık Kibar and F. Us, “Thermal, mechanical and water adsorption properties of corn starch–carboxymethylcellulose/methylcellulose biodegradable films,” J. Food Eng., vol. 114, no. 1, pp. 123–131, 2013, doi: 10.1016/j.jfoodeng.2012.07.034.

[6] L. Ballesteros-Mártinez, C. Pérez-Cervera, and R. Andrade-Pizarro, “Effect of glycerol and sorbitol concentrations on mechanical, optical, and barrier properties of sweet potato starch film,” NFS J., vol. 20, pp. 1–9, 2020, doi: 10.1016/j.nfs.2020.06.002.

[7] N. Laohakunjit and A. Noomhorm, “Effect of plasticizers on mechanical and barrier properties of rice starch film,” Starch/Stärke, vol. 56, pp. 348–356, 2004, doi: 10.1002/star.200300249.

[8] A. A. Calargün, B. Girgin, and N. Tugrul, “Investigation of glycerol and sorbitol effect to the cinnamon essential oil incorporated corn or rice starch based edible films,” Indian J. Chem. Technol., vol. 31, no. 4, pp. 531–537, 2024, doi: 10.56042/ijct.v31i4.1470.

[9] E.-E. Sirbu, A. Dinita, M. Tănase, A.-I. Portoacă, A. Bondarev, C.-E. Enascuta, and C. Calin, “Influence of plasticizers concentration on thermal, mechanical, and physicochemical properties on starch films,” Processes, vol. 12, no. 9, p. 2021, 2024, doi: 10.3390/pr12092021.

[10] Y. Amaregouda and K. Kamanna, “Carboxymethyl cellulose/starch-based films incorporating chitosan nanoparticles for multifunctional food packaging,” Cellulose, vol. 31, pp. 2413–2427, 2024, doi: 10.1007/s10570-024-05753-8.

[11] Zhang, Wei, et al. "Effect of nano-silica and sorbitol on the properties of chitosan-based composite films." Polymers 15.19 (2023): 4015.

[12] R. Zhang, X. Wang, and M. Cheng, “Preparation and characterization of potato starch film with various size of nano-SiO₂,” Polymers, vol. 10, no. 10, p. 1172, 2018, doi: 10.3390/polym10101172.

[13] H. G. Xiong, S. W. Tang, H. L. Tang, and P. Zou, “The structure and properties of a starch-based biodegradable film,” Carbohydr. Polym., vol. 71, no. 2, pp. 263–268, 2008, doi: 10.1016/j.carbpol.2007.05.035.

[14] H. Ostadi, S. Gilak Hakimabadi, F. Nabavi, M. Vossoughi, and I. Alemzadeh, “Enzymatic and soil burial degradation of corn starch/glycerol/sodium montmorillonite nanocomposites,” 2020, doi: 10.1177/2041247920952649.

[15] S. Munfarida et al., “The effect of carboxymethyl cellulose and glycerol addition on the biodegradability of cassava starch-based biofilms,” J. Trop. AgriFood, 2026, doi: 10.35941/jtaf.8.5.2026.26720.44-5016.

[16] W. Pormsila and P. Udomphoch, “Biodegradable film of starch-based carboxymethyl cellulose from rice husk and straw for application in food preservation,” Processes, vol. 13, no. 5, p. 1387, 2025, doi: 10.3390/pr13051387.

[17] G. Fan, Q. Peng, Y. Chen, Y. Long, J. Bai, G. Song, and Q. Cheng, “Preparation of biodegradable composite films based on carboxymethylated holocellulose from wheat straw,” Int. J. Biol. Macromol., vol. 242, p. 124868, 2023, doi: 10.1016/j.ijbiomac.2023.124868.

[18] I. P. Adisurya and M. A. Falah, “Production of Biodegradable Straw from Banana Peel,” Agroindustrial, vol. 9, no. 1, p. 1-12, 2022, doi: 10.22146/aij.v9i1.77148

[19] Y. Liu, N. Li, X. Zhang, T. Wei, M. Ma, Q. Sun, M. Li, and F. Xie, “Eco-friendly drinking straws: Navigating challenges and innovations,” Trends in Food Science & Technology, vol. 147, p. 10451, 2024, doi: 10.1016/j.tifs.2024.104511.

[20] T. Dong, W. Chen, C. Cai, and F. Bai, “Water-stable, strong, biodegradable lignocellulose straws replacement for plastic straws,” Chemical Engineering Journal, vol. 451, no. 2, p. 138970, doi : 10.1016/j.cej.2022.138970.

[21] R. Rai and P. Dhar, “Microplastic and adhesive free, multifunctional, circular economy approach-based biomass-derived drinking straws,” ISCIENCE, vol. 27, no. 5, p. 109630, 2024, doi: 10.1016/j.isci.2024.109630.

[22] A. A. Gabriel, A. Y. Rahmawati, Y. S. Taradipa, and E. Toshiharu, “mechanical and morphological properties,” Discov. Mater., vol. 4, no. 55, 2024, doi: 10.1007/s43939-024-00128-z.

[23] S. Qin et al., “Carboxymethylcellulose reinforced starch fi lms and rapid detection of spoiled beverages,” no. January, pp. 1–10, 2023, doi: 10.3389/fbioe.2022.1099118.

[24] W. Tongdeesoontorn, L. J. Mauer, S. Wongruong, and P. Sriburi, “Physical and Antioxidant Properties of Cassava Starch – Carboxymethyl Cellulose Incorporated with Quercetin and TBHQ as Active Food Packaging,” pp. 1–18.

[25] J. Tarique, S. M. Sapuan, and A. Khalina, “Effect of glycerol plasticizer loading on the physical , mechanical , thermal , and barrier properties of arrowroot ( Maranta arundinacea ) starch biopolymers,” Sci. Rep., vol. 11, no. 13900, pp. 1–17, 2021, doi: 10.1038/s41598-021-93094-y.

[26] S. Jayarathna and M. Andersson, “Recent Advances in Starch-Based Blends and Composites for Bioplastics Applications,” pp. 1–24, 2022.

[27] Y. Liang, J. He, M. Zhuang, F. Chen, K. Yang, and J. Ma, “Bio ‑ based alternatives to plastic drinking straws : are they more environmentally benign and consumer preferred ?,” Carbon Res., 2023, doi: 10.1007/s44246-023-00062-4.

[28] W. Abotbina, S. M. Sapuan, M. T. H. Sultan, M. F. M. Alkbir, and R. A. Ilyas, “Development and Characterization of Cornstarch-Based Bioplastics Packaging Film Using a Combination of Different Plasticizers,” pp. 1–18, 2021.

[29] Hazrol, M. D., et al. "Corn starch (Zea mays) biopolymer plastic reaction in combination with sorbitol and glycerol." Polymers 13.2 (2021): 242.

[30] Abhay, Simone Shah, et al. "Wear resistance, color stability and displacement resistance of milled PEEK crowns compared to zirconia crowns under stimulated chewing and high-performance aging." Polymers 13.21 (2021): 3761.