Penguatan Daya Saing Industri Gerabah melalui Model Keuangan Terintegrasi

Nelly; Sufitrayati; Muhammad Bakri; Chairul  Amni; Samsul  Ikhbar; Asmaul  Husna

Authors

Nelly Universitas Serambi Mekkah Author
Sufitrayati Universitas Serambi Mekkah Author
Muhammad Bakri Universitas Serambi Mekkah Author
Chairul Amni Universitas Serambi Mekkah Author
Samsul Ikhbar Universitas Serambi Mekkah Author
Asmaul Husna Universitas Serambi Mekkah Author

Keywords:

pottery industry; MSMEs; integrated finance; competitiveness; creative economy

Abstract

The pottery industry, as part of the craft subsector within the creative economy, plays an important role in strengthening MSMEs and local economic development, yet it continues to face significant competitiveness challenges. These challenges are not only related to technological limitations and market access, but also to weak financial management practices that remain fragmented and short-term oriented. This review article aims to systematically examine the role of integrated financial models in enhancing the competitiveness of the pottery industry. Using a literature review approach, this study synthesizes prior research on MSME financial management, cost efficiency, cash flow, investment planning, and business performance. The findings indicate that integrating financing, cost control, cash flow management, and investment planning contributes positively to operational efficiency, product quality, market access, and business sustainability. This article contributes theoretically by positioning finance as a strategic system rather than a purely administrative function in strengthening pottery industry competitiveness. Practical and policy implications highlight the importance of financial literacy, inclusive financing support, and financial digitalization to facilitate the effective and sustainable implementation of integrated financial models.

Author Biographies

Nelly , Universitas Serambi Mekkah

Prodi Manajemen
Muhammad Bakri, Universitas Serambi Mekkah

Prodi Manajemen
Chairul Amni, Universitas Serambi Mekkah

Prodi Teknik Industri FT USM
Samsul Ikhbar, Universitas Serambi Mekkah

Prodi Manajemen
Asmaul Husna, Universitas Serambi Mekkah

Mahasiswa Prodi Akuntansi

References

[1] F. Hanum et al., “Strategi Ekspansi Usaha UMKM dengan Pendekatan Metoda Hybrid SWOT Analisis dan AHP,” J. Serambi Eng., vol. VIII, no. 1, pp. 4991–4999, 2023, [Online]. Available: https://ojs.serambimekkah.ac.id/index.php/jse/article/view/5675

[2] UNCTAD, “UNCTAD Annual Report,” pp. 1–84, 2022.

[3] Kemenparekraf, “Laporan Kinerja Kemenparekraf 2023,” vol. 32, no. 3, pp. 167–186, 2023.

[4] R. Nengsih, M. Mukhdasir, K. Khairuna, and M. Ahyar, “Inovasi dan Diversifikasi Produk Gerabah sebagai Katalisator Pertumbuhan Laba pada UMKM Sektor Kerajinan,” J. Serambi Eng., vol. 10, no. 3, 2025.

[5] C. Rusmina, M. Mawardi, M. Bakri, S. Susanti, R. Radhiana, and C. A. Surayya, “Meningkatkan Daya Saing UMKM melalui Penerapan Just-in-Time dan Teknologi Sederhana,” J. Serambi Eng., vol. 10, no. 1, 2025.

[6] R. Radhiana, M. Mukhdasir, J. Surya, N. Syamsuddin, M. Maryam, and A. Syafitri, “Pengaruh Sistem Produksi Lean terhadap Pengurangan Biaya Produksi dan Peningkatan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[7] M. Marlina, S. Sufitrayati, S. Amri, N. Syamsuddin, R. Radhiana, and R. M. Akbar, “Inovasi Operasional untuk Efisiensi Biaya dan Peningkatan Profit di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[8] OECD, “OECD Studies on SMEs and Entrepreneurship,” OECD. [Online]. Available: https://www.oecd.org/en/publications/oecd-studies-on-smes-and-entrepreneurship_20780990.html

[9] M. Mahdi, J. Surya, R. Rahmi, I. Fahmi, and N. Shakira, “Integrasi Inovasi Digital dalam Manajemen Keuangan dan Rantai Pasok Industri Daur Ulang Plastik,” J. Serambi Eng., vol. 10, no. 3, 2025.

[10] R. Yulianti, R. Nengsih, and R. Alifia, “Pengaruh Inovasi Produk Terhadap Kinerja Keuangan dan Profitabilitas Industri Plastik Daur Ulang,” J. Serambi Eng., vol. 10, no. 2, 2025.

[11] S. Singh, R. Raj, B. M. Dash, V. Kumar, M. Paliwal, and S. Chauhan, “Access to finance and its impact on operational efficiency of MSMEs: mediating role of entrepreneurial personality and self-efficacy,” J. Small Bus. Enterp. Dev., vol. 32, no. 3, pp. 596–619, 2025.

[12] C. Rusmina, Z. Zainuddin, J. Juwita, M. Marlina, and A. Jelita, “Risiko Investasi pada Inovasi Teknologi Ramah Lingkungan dalam Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 2, 2025.

[13] E. F. Brigham and J. F. Houston, “Fundamentals of financial management: Concise by Cengage,” Cengage Learn., pp. 1–7, 2019.

[14] O. F. Briones, S. M. Camino-Mogro, and V. J. Navas, “Working capital, cash flow and profitability of intensive MSMEs: Evidence from Ecuador,” J. Entrep. Emerg. Econ., vol. 16, no. 2, pp. 396–417, 2024.

[15] C. N. Ciocoiu, C. Radu, S. E. Colesca, and A. Prioteasa, “Exploring the link between risk management and performance of MSMEs: A bibliometric review,” J. Econ. Surv., vol. 39, no. 4, pp. 1523–1552, 2025.

[16] M. Marlina, T. M. H. A. H. Almuqaramah, C. R. Rusmina, R. Rahmi, and M. Zidane, “Analisis Profitabilitas dan Efisiensi Operasional pada Industri Perikanan Skala Kecil di Indonesia,” J. Serambi Eng., vol. 10, no. 3, 2025.

[17] T. Eckert, S. Hüsig, and C. Doblinger, “The influence of market entry strategies on the success of digital service innovations in the mobility sector,” J. Serv. Res., vol. 28, no. 4, pp. 669–686, 2025.

[18] G. F. Watson IV, S. Weaven, H. Perkins, D. Sardana, and R. W. Palmatier, “International market entry strategies: Relational, digital, and hybrid approaches,” J. Int. Mark., vol. 26, no. 1, pp. 30–60, 2018.

[19] R. Kaplinsky and M. Morris, “Thinning and thickening: productive sector policies in the era of global value chains,” Eur. J. Dev. Res., vol. 28, no. 4, pp. 625–645, 2016.

[20] M. Maryam, C. I. Amalia, F. Hanum, C. Hamdiah, and M. Wahyuna, “Inovasi Desain Produk sebagai Strategi Meningkatkan Profitabilitas UMKM Kerajinan Rumahan,” J. Serambi Eng., vol. 10, no. 3, 2025.

[21] B. T. Manzakoğlu and Ö. Er, “Design management capability framework in global value chains: Integrating the functional upgrading theory from OEM to ODM and OBM,” Des. J., vol. 21, no. 1, pp. 139–161, 2018.

[22] M. Maryam, R. Nengsih, T. Makmur, S. Susanti, A. Arsyad, and A. R. Rahmi, “Meningkatkan Profitabilitas UMKM Pengrajin Gerabah dengan Efisiensi Keuangan dan Optimalisasi Produksi,” J. Serambi Eng., vol. 10, no. 1, 2025.

[23] Q. Gu, T. Jitpaipoon, and J. Yang, “The impact of information integration on financial performance: A knowledge-based view,” Int. J. Prod. Econ., vol. 191, pp. 221–232, 2017.

[24] S. Ikhbar, N. Nelly, M. Maksalmina, C. Amni, A. Arsyad, and A. A. Fansuri, “Strategi Pengelolaan Operasional untuk Meningkatkan Keuntungan dan Mengurangi Pengeluaran dalam Industri Daur Ulang Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[25] S. O. B. Sitorus, R. S. Njotoprajitno, and B. Hadianto, “Information on cash flow statements and stock return,” Econ. Bus. Q. Rev., vol. 6, no. 1, 2023.

[26] M. Ayyagari, Y. Cheng, and A. Weinberger, “Firm Resiliency: The Role of Spillovers,” J. Financ. Quant. Anal., vol. 60, no. 3, pp. 1527–1557, 2025.

[27] I. Jalil, M. Malahayati, S. Yana, H. Heriyana, I. Ilyas, and R. Nengsih, “Optimalisasi Proses Bisnis UMKM Kerajinan Gerabah melalui Sinergi Inovasi Pemasaran dan Manajemen Risiko Terstruktur,” J. Serambi Eng., vol. 10, no. 1, 2025.

[28] L. Lakhtionova, N. Muranova, O. Bugaiov, A. Ozeran, and S. Kalabukhova, “Balance sheet (statement of financial position) transformation in the light of new digital technology: ukrainian experience,” in International Conference on Integrated Science, Springer, 2020, pp. 25–41.

[29] U. Ulfia, R. Rahmi, Z. Yusuf, R. Radhiana, M. Mukhdasir, and A. Humaira, “Strategi Pemilihan Bahan Baku Daur Ulang untuk Meningkatkan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.

[30] Z. Zainuri, M. Z. Yasin, R. N. F. Amijaya, R. N. Wilantari, and S. Vipindrartin, “The role of government policy on the performance of MSMEs in the creative industry: evidence from Jember Regency, East Java, Indonesia,” Cogent Econ. Financ., vol. 13, no. 1, p. 2446657, 2025.

[31] M. Shafi, “Sustainable development of micro firms: examining the effects of cooperation on handicraft firm’s performance through innovation capability,” Int. J. Emerg. Mark., vol. 16, no. 8, pp. 1634–1653, 2021.

[32] L. Limbrick, “The interplay between competition and co-operation and the effect on innovation in mature industry clusters: a case study of the North Staffordshire ceramics industry, tableware and giftware sector.” Staffordshire University, 2018.

[33] T. T. H. Tambunan, “Development of MSMEs in Indonesia and Uganda,” 2024.

[34] W. Abdallah, A. Harraf, H. Ghura, and M. Abrar, “Financial literacy and small and medium enterprises performance: the moderating role of financial access,” J. Financ. Report. Account., vol. 23, no. 4, pp. 1345–1364, 2025.

[35] K. Megersa, “Improving SMEs’ access to finance through capital markets and innovative financing instruments: some evidence from developing countries,” 2020.

[36] WorldBank, “Small and Medium Enterprises in Emerging Economies: The Achilles’ Heel of Corporate ESG Responsibility Practices?” [Online]. Available: https://openknowledge.worldbank.org/entities/publication/c182ed68-0123-5387-bad9-68ef47af671e

[37] S. Raes, “Understanding SME heterogeneity: towards policy relevant typologies for SMEs and entrepreneurship: an OECD Strategy for SMEs and Entrepreneurship,” 2021.