Inovasi Teknologi Daur Ulang Plastik untuk Meningkatkan Efisiensi dan Profitabilitas Usaha Mikro
Keywords:
Technological Innovation, Plastic Recycling, Cost Efficiency, Profitability, Micro-EnterprisesAbstract
This study explores the role of plastic recycling technology innovation in enhancing cost efficiency and profitability among micro-enterprises, while contributing to sustainable development goals. Using a qualitative literature review approach, the research synthesizes findings from international and national sources, including OECD, UNEP, UNIDO, the Indonesian Ministry of Industry, and various academic journals. The analysis identifies three main technological approaches—mechanical, chemical, and digital (smart recycling)—each offering different levels of efficiency, investment requirements, and relevance to micro-enterprises. The results indicate that mechanical recycling remains the most feasible option due to its low cost and ease of implementation, while chemical and digital recycling hold potential for long-term transformation when supported by policy and financial incentives. The study also highlights the social and environmental benefits of adopting recycling innovations, including waste reduction, job creation, and the development of green markets. Overall, technological innovation in plastic recycling serves as a strategic instrument for achieving economic efficiency, business profitability, and sustainability within Indonesia’s circular economy framework.
References
[1] F. Hanum et al., “Strategi Ekspansi Usaha UMKM dengan Pendekatan Metoda Hybrid SWOT Analisis dan AHP,” J. Serambi Eng., vol. VIII, no. 1, pp. 4991–4999, 2023, [Online]. Available: https://ojs.serambimekkah.ac.id/index.php/jse/article/view/5675
[2] Kementerian Koordinator Bidang Perekonomian Republik Indonesia, “Pemerintah Dorong UMKM Naik Kelas, Tingkatkan Kontribusi terhadap Ekspor Indonesia.” [Online]. Available: https://www.ekon.go.id/publikasi/detail/6152/pemerintah-dorong-umkm-naik-kelas-tingkatkan-kontribusi-terhadap-ekspor-indonesia?utm_source=chatgpt.com
[3] I. Jalil, M. Malahayati, S. Yana, H. Heriyana, I. Ilyas, and R. Nengsih, “Optimalisasi Proses Bisnis UMKM Kerajinan Gerabah melalui Sinergi Inovasi Pemasaran dan Manajemen Risiko Terstruktur,” J. Serambi Eng., vol. 10, no. 1, 2025.
[4] R. Radhiana, M. Mukhdasir, J. Surya, N. Syamsuddin, M. Maryam, and A. Syafitri, “Pengaruh Sistem Produksi Lean terhadap Pengurangan Biaya Produksi dan Peningkatan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.
[5] J. van Leeuwen and I. R. F. Surya, “Network power and exclusion of informal waste pickers when plastic flows change: A case study of community waste banks in Klaten Municipality in Indonesia,” Mar. Policy, vol. 167, p. 106285, 2024, doi: https://doi.org/10.1016/j.marpol.2024.106285.
[6] S. Heinonen, J. Ruotsalainen, and J. Karjalainen, “Energy Futures 2050,” Turku Finl. Futur. Res. Cent., 2017.
[7] C. Rusmina, Z. Zainuddin, J. Juwita, M. Marlina, and A. Jelita, “Risiko Investasi pada Inovasi Teknologi Ramah Lingkungan dalam Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 2, 2025.
[8] S. Ikhbar, N. Nelly, M. Maksalmina, C. Amni, A. Arsyad, and A. A. Fansuri, “Strategi Pengelolaan Operasional untuk Meningkatkan Keuntungan dan Mengurangi Pengeluaran dalam Industri Daur Ulang Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.
[9] M. Marlina, S. Sufitrayati, S. Amri, N. Syamsuddin, R. Radhiana, and R. M. Akbar, “Inovasi Operasional untuk Efisiensi Biaya dan Peningkatan Profit di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.
[10] Juwita et al., “Peluang Ekspansi Energi Terbarukan Biomassa dengan Analisis SWOT,” J. Serambi Eng., vol. 8, no. 1, pp. 4947–4956, 2023.
[11] M. Maryam, R. Nengsih, T. Makmur, S. Susanti, A. Arsyad, and A. R. Rahmi, “Meningkatkan Profitabilitas UMKM Pengrajin Gerabah dengan Efisiensi Keuangan dan Optimalisasi Produksi,” J. Serambi Eng., vol. 10, no. 1, 2025.
[12] M. Marlina, T. M. H. A. H. Almuqaramah, C. R. Rusmina, R. Rahmi, and M. Zidane, “Analisis Profitabilitas dan Efisiensi Operasional pada Industri Perikanan Skala Kecil di Indonesia,” J. Serambi Eng., vol. 10, no. 3, 2025.
[13] U. Ulfia, R. Rahmi, Z. Yusuf, R. Radhiana, M. Mukhdasir, and A. Humaira, “Strategi Pemilihan Bahan Baku Daur Ulang untuk Meningkatkan Profitabilitas di Industri Pengolahan Limbah Plastik,” J. Serambi Eng., vol. 10, no. 1, 2025.
[14] P. Mauliza et al., “Kendala Pemenuhan Suplai dan Permintaan Energi Terbarukan Biomassa Indonesia,” J. Serambi Eng., vol. 8, no. 3, 2023.
[15] A. Schade, M. Melzer, S. Zimmermann, T. Schwarz, K. Stoewe, and H. Kuhn, “Plastic waste recycling, A chemical recycling perspective,” ACS Sustain. Chem. Eng., vol. 12, no. 33, pp. 12270–12288, 2024.
[16] UNEP, “Plastic Pollution.” [Online]. Available: https://www.unep.org/plastic-pollution?utm_source=chatgpt.com
[17] OECD, Improving Plastics Management: Trends, Policy Responses, and the Role of International Co-operation and Trade, vol. 60, no. 1. 2022.
[18] WWF Indonesia, “Rekomendasi Kebijakan Konten Daur Ulang Di Indonesia,” 2025, [Online]. Available: https://plasticsmartcities.wwf.id/storage/user_uploads/9bbb1a4f398155875a796ffab629b1ff.pdf
[19] A. Paletta, W. Leal Filho, A.-L. Balogun, E. Foschi, and A. Bonoli, “Barriers and challenges to plastics valorisation in the context of a circular economy: Case studies from Italy,” J. Clean. Prod., vol. 241, p. 118149, 2019.
[20] C. Rusmina, M. Mawardi, M. Bakri, S. Susanti, R. Radhiana, and C. A. Surayya, “Meningkatkan Daya Saing UMKM melalui Penerapan Just-in-Time dan Teknologi Sederhana,” J. Serambi Eng., vol. 10, no. 1, 2025.
[21] OECD, “Global Plastics Outlook: Economic Drivers, Environmental Impacts and Policy Options,” Glob. Plast. Outlook, p. 201, 2022, [Online]. Available: https://www.oecd-ilibrary.org/environment/global-plastics-outlook_de747aef-en
[22] UNIDO, “Development of recycling industries within the UNIDO circular economy approach,” United Nations Ind. Dev. Organ., p. 33, 2019, [Online]. Available: https://www.unido.org/sites/default/files/files/2019-07/Development of recycling industries within the UNIDO circular economy approach.pdf
[23] Kementeria PPN/Bappenas, “Peta Jalan dan Rencana Aksi Ekonomi Sirkular Indonesia,” 2025.
[24] C. I. P. Martínez and A. C. Poveda, “Strategies to improve sustainability: an analysis of 120 microenterprises in an emerging economy,” Glob. Sustain., vol. 5, p. e3, 2022.
[25] K. Ragaert, L. Delva, and K. Van Geem, “Mechanical and chemical recycling of solid plastic waste,” Waste Manag., vol. 69, pp. 24–58, 2017.
[26] C. Lubongo, M. A. A. Bin Daej, and P. Alexandridis, “Recent developments in technology for sorting plastic for recycling: The emergence of artificial intelligence and the rise of the robots,” Recycling, vol. 9, no. 4, p. 59, 2024.
[27] V. Skvarciany, I. Lapinskaitė, and G. Volskytė, “Circular economy as assistance for sustainable development in OECD countries,” 2021.
[28] A. Gąsior, J. Grabowski, J. Ropęga, and A. Walecka, “Creating a competitive advantage for micro and small enterprises based on eco-innovation as a determinant of the energy efficiency of the economy,” Energies, vol. 15, no. 19, p. 6965, 2022.
[29] V. Skvarciany, I. Lapinskaite, and G. Volskyte, “Circular economy as assistance for sustainable development in OECD countries. Oeconomia Copernicana, 12 (1), 11–34.” 2021.
[30] T. Zuofa, E. G. Ochieng, and I. Ode-Ichakpa, “An evaluation of determinants influencing the adoption of circular economy principles in Nigerian construction SMEs,” Build. Res. Inf., vol. 51, no. 1, pp. 69–84, 2023.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Cut Hamdiah, Marlina Marlina, Zainuddin Zainuddin, Rahmi Rahmi (Author); Sausan Nabila (Translator)
This work is licensed under a Creative Commons Attribution 4.0 International License.
