Perancangan Mesin Pres Sampah Basah Untuk Pembangkit Listrik Tenaga Sampah di Universitas Singaperbangsa Karawang

Authors

  • Willy Rolies Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang Author
  • Marno Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang Author
  • Kardiman Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang Author

Keywords:

Perancangan Mesin Press, Pengelolaan Sampah, Hidrolik, Efisiensi Pembakaran, SolidWorks

Abstract

Waste-to-energy (WtE) plants in Indonesia present a novel approach to the increasingly urgent challenge of waste management. This research project is concerned with the design of a waste press machine that will be suitable for use with the UNSIKA WtE incinerator. The primary objective is to reduce the volume of waste material entering the incinerator. This process not only enhances combustion efficiency but also contributes to a reduction in emissions and the utilisation of renewable energy. This research entails the selection of suitable materials for the press machine and the design of a mold that aligns with the dimensions of the incinerator hopper. The utilisation of SolidWorks 2023 software facilitates more precise design analysis and simulation. The findings of this research demonstrate that the constructed press machine is effective in reducing waste volume, thereby making a valuable contribution to waste management and the utilisation of renewable energy. In conclusion, this research not only provides a technical solution for waste management but also serves as a reference for further research in the same field.

References

[1] Izharsyah, Jehan Ridho. "Analisis strategis Pemko Medan dalam melakukan sistem pengelolaan sampah berbasis open dumping menjadi sanitary landfill." Jurnal Ilmiah Muqoddimah: Jurnal Ilmu Sosial, Politik dan Hummaniora 4.2 (2020): 109-117.

[2] D. oleh Enri Damanhuri Tri Padmi, “Pengelolaan Sampah,” 2010

[3] R. Samsinar and K. Anwar, “Studi Perencanaan Pembangkit Listrik Tenaga Sampah Kapasitas 115 Kw (Studi Kasus Kota Tegal),” Jurnal Elektum, vol. 15, no. 2.

[4] V. Panchal, P. Chauhan, B. Vishvakarma, and M. Engineer…, “Design and Development of Hydraulic Press with Die,” 2016, doi: 10.13140/RG.2.1.2517.6169/1.

[5] B. Tuahta Bangun, R. Purba, and H. Batih, “Analisis Ketahanan Energi Pembangkit Listrik Tenaga Sampah (PLTSa) Metode Landfill dan Thermal di Tempat Pembuangan Sampah Terpadu (TPST) Bantar Gebang,” Jurnal Ilmiah Program Studi Teknik Elektro, vol. 2, 2019.

[6] R. A. Putra and A. Wahid, “Perancangan Dan Pembuatan Prototipe Mesin Pengepress Hidrolik Limbah Plastik,” Journal Mechanical and Manufacture Technology, vol. 2, no. 1, 2021. (2014). Distributed Generation Pembangkit Listrik Tenaga Sampah Kota (PLTSa) Type Incinerator Solusi Listrik Alternatif Kota Medan. Jurnal Sains Dan Teknologi, 121-128.

[7] K. David Somade et al., “Design and Analysis of an Hydraulic Trash Compactor Digital Technology Enabled Circular Economy: Models for Environmental and Resource Sustainability View project See Profile Design and Analysis of an Hydraulic Trash Compactor”, [Online]. Available: https://www.researchgate.net/publication/342424735

[8] R. Baidya, B. Debnath, D. De, and S. K. Ghosh, “Sustainability of Modern Scientific Waste Compacting Stations in the City of Kolkata,” Procedia Environ Sci, vol. 31, pp. 520–529, 2016, doi: 10.1016/j.proenv.2016.02.072.

[9] Binaindojaya. (2020). Glasswool: Insulator Terbaik untuk Bangunan Modern. Jurnal Bahan Bangunan Indonesia, 12(2), 45-52..

[10] Wiramas. (2021, 15 Mei). Plat Besi: Panduan Lengkap untuk Pemilihan dan Penggunaan. Diperoleh dari https://wiramas.com/page/view/20_plat_besi

[11] Alya, Z., & Zulfikar, A. (2021, Agustus 1). Harga Besi Siku Terbaru: Analisis dan Perbandingan. 99.co. https://www.99.co/blog/indonesia/harga-besi-siku-terbaru/

[12] Green Generation Indonesia. (n.d.). Pembangkit Listrik Tenaga Sampah. Retrieved from https://greeneration.org/

[13] Ardiansah, J., & Budijono, A. P. (2020). Penentuan Dimensi Hopper Pada Mesin Filler Berdasarkan Karakteristik Luncur Material (Grain, Powder). Jurnal Teknik Mesin, 8(2), 65-76

[14] M. B and A. H. Setyono, "Perancangan dan Analisis Kekuatan Frame Sepeda Hibrid "Trrisona" Menggunakan Software Autodesk Inventor," J.IPTEK, vol. 20, no. 2, p. 37, 2016.

[15] R. S and dkk, "Perancangan dan Simulasi Frame Mobil Gokart," Enthalpy, vol. 3, pp. 1-10, 2018.

[16] Khoiron, Mohammad Syifaul. "Perbandingan Kekakuan dan Kekuatan Chassis dan Body Kendaraan yang Terbuat dari Material Aluminium dan Carbon Fiber terhadap Beban Vertikal dan Torsional Bending." Skripsi: Institut Teknologi Sepuluh Nopember. (2016).

[17] Maharani, Pelangi Shafira, and Faimun Faimun. "Modifikasi Perencanaan Struktur Gedung Grand Dharmahusada Lagoon Menggunakan Struktur Komposit Baja Beton CFT dengan Sistem Rangka Bresing Eksentris Tipe Two-Story-X Braced." Jurnal Teknik ITS (SINTA: 4, IF: 1.1815) 8.1 (2019): D10-D17.

[18] “Juvinall, R. C., & Marshek, K. M. (2017). Fundamentals of machine component design (7th ed.). Hoboken, NJ: John Wiley & Sons.”

[19] Basselo, Daswin, Stenly Tangkuman, and Michael Rembet. "Optimasi Diameter Poros Terhadap Variasi Diameter Sproket Pada Roda Belakang Sepeda Motor." Jurnal Poros Teknik Mesin Unsrat 3.1 (2014)

[20] Pasha, Adnan Kemal, and Riki Andra Putra. "Analisa Kemuluran Rantai Sepeda Motor Terhadap Usia Pemakaian Rantai." Prosiding Seminar Nasional Cendekiawan. 2018.

[21] Aprilani, Muhamad Yoga. "Optimalisasi Insinerator Kapasitas 5kg Sampah Untuk Pembangkit Listrik Tenaga Sampah (PLTSa) Di Kampus Unsika." Jurnal Ilmiah Wahana Pendidikan 9.12 (2023): 55-61.

[22] H. A. E.-H. and M. M. E.-S. A. A. Shabana, “Bearing Design and Selection for Optimum Performance and Reliability,” International Journal of Rotating Machinery, vol. 2013, Article ID 731243, 10 pages, 2013.

Downloads

Published

26/09/2024

How to Cite

[1]
“Perancangan Mesin Pres Sampah Basah Untuk Pembangkit Listrik Tenaga Sampah di Universitas Singaperbangsa Karawang”, jse, vol. 9, no. 4, Sep. 2024, Accessed: Nov. 24, 2024. [Online]. Available: https://jse.serambimekkah.id/index.php/jse/article/view/489

Most read articles by the same author(s)

Similar Articles

1-10 of 110

You may also start an advanced similarity search for this article.