Analisis Pengelolaan Sampah Terpadu (Studi Kasus: Kabupaten Bireuen)
Keywords:
Sampah, pengelolaan sampah, tempat pemrosesan akhir, landfillAbstract
The waste problem is in the national spotlight as the population grows every year and more and more waste is produced. Waste management in Bireuen Regency is still based on the old paradigm of collection-transport-disposal, with waste management services focused only on urban areas. The transported waste is simply dumped in the landfill and incinerated. This research aims to determine the waste management system in Bireuen Regency. The method used in this research is observation and interviews regarding the operational system of waste management and calculation of waste generation based on estimates of waste generation. The research results show that the amount of waste produced based on the estimated waste generation is 221,937 kg/day, while the amount of waste transported is 52,316.5 kg/day. The existing waste management system in Bireuen Regency still follows the old paradigm of collect-transport-disposal. An integrated waste management system in accordance with Law 18 of 2008, namely reduction and treatment.
References
[1] S.D. Mustikasari, "Pengaruh Kepadatan Penduduk Terhadap Timbulan Sampah Masyarakat Kecamatan Bojonegoro Kabupaten Bojonegoro Tahun 2017-2020," Desember, 2021.
[2] M. Lingga, "Studi Timbulan da Komposisi Sampah Kawasan Kampus UIN Ar-Raniry", 2019.Ambariski, P. P. D., & Herumurti, W. "Sistem Pengangkutan Sampah Berdasarkan Kapasitas Kendaraan Pengangkut dan Kondisi Kontainer Sampah di Surabaya Barat," Jurnal Teknik ITS, vol 5, no. 2, 2016.
[3] R. Fuadhilah, "Timbulan Dan Kompisisi Sampah Sebagai Dasar Perancangan Teknis Operasional Persampahan Pada Kecamatan Serpong, Serpong Utara, dan Setu Sebagai Daerah Industri di Kota Tangerang Selatan," 2012.
[4] I. S. Tangoi, "Studi Pengelolaan Sampah di Kawasan Pedesaan Berdasarkan Hasil Persepsi dan Perilaku Masyarakat (Studi Kasus: Desa Bunggalo)," Universitas Islam Idonesia, 2021.
[5] D. Prajnawita, A. D. Moelyaningrum, & P. T. Ningrun, "Analysis Flies Density at Final Waste Disposal Jember Distric Area, Indonesia (Studi at Pakusari landfill and Ambulu landfill)," Jurnal Kesehatan Lingkungan, vol 12, no. 2, 136. https://doi.org/10.20473/jkl.v12i2.2020.136-143, 2020.
[6] A. R. Sunarda, F. Z. Farhana, & R. Q. Chahyani, "ECOBRICK Sebagai Pemanfaatan Sampah Plastik di Laboratorium Biologi dan Foodcourt Universitas Negeri Yogyakarta," Pengabdian Masyarakat MIPA Dan Pendidikan MIPA, vol 4, no. 1, pp 113–121, 2020.
[7] N. W. E. Putri, "Komunikasi Sosial Dalam Mensosialisasikan Penetapan Kebijakan Gubernur Bali Tentang Pembatasan Timbulan Sampah Plastik Sekali Pakai," Jurnal Nomosleca, vol 5, no. 1. https://doi.org/10.26905/nomosleca.v5i1.2783. 2019
[8] U. Siahaan, S. P. Eni, & Ulinata, "Pengurangan Volume Sampah Dengan Memanfaatkan Dan Mendaur Ulang Sampah Melalui Kegiatan Pembuatan Pupuk Organik-Kompos. JURNAL Comunità Servizio : Jurnal Terkait Kegiatan Pengabdian Kepada Masyarakat, Terkhusus Bidang Teknologi, Kewirausahaan Dan Sosial Kemasyarakatan," vol 1, no. 1, pp 1–10, 2019, https://doi.org/10.33541/cs.v1i1.948
[9] M. Y. Arsyandi, Y. Pratama, & L. Apriyanti, "Perencanaan Sistem Pewadahan dan Pengumpulan Sampah Rumah Tangga di Bantaran Sungai Cikapundung Kota Bandung," IV, 638–648. 2019.
[10] B. Akbar, "Studi Karakteristik Timbulan Sampah dan Analisis Pengetahuan Pengelolaan Sampah Penghuni Rumah Hunian (Indekost) (Studi Kasus: Jenis Eksklusif dan Non Eksklusif di Sekitar Kampus Terpadu UII)," 2018.
[11] P. P. D. Ambariski & W. Herumurti, "Sistem Pengangkutan Sampah Berdasarkan Kapasitas Kendaraan Pengangkut dan Kondisi Kontainer Sampah di Surabaya Barat," Teknik ITS, vol 5, no. 2, 2016.
[12] D. W. Manurung & E. B. Santoso, "Penentuan Lokasi Tempat Pemrosesan Akhir ( TPA ) Sampah yang Ramah Lingkungan di Kabupaten Bekasi," Teknik ITS, vol 8, no. 2, 2019.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Desi Elvida, Rahmat Abbas, Cut Azizah` (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
