Analisis Persediaan Bahan Baku Plastik PET Bening dengan Metode Min-Max di PT Gajah Surya Plastik
Keywords:
bahan baku, Min-max Stock, plastik, Persediaan, Safety StockAbstract
The uncertain amount of raw materials greatly affects the smoothness of production in a company and the amount of production output, thus encouraging researchers to conduct research on raw material inventory control. PT. Gajah Surya Plastik, is a company engaged in plastic recycling. Companies need to know the minimum stock of raw materials that must be held and the maximum stock limit that the company can hold in order for the raw material supply to be optimal. The min-max stock method was used to determine the maximum and minimum stock levels of the company's clear PET plastic raw materials. This research was carried out using primary data on the company's raw materials and interviews with related parties. From the research, the results of the data processing are that the minimum stock limit is 38,254 kg and the maximum raw material stock limit is 67,309 kg. With a safety stock value of 9199 kg. In addition, the raw material consumption for the next period is forecast with minimum error using the exponential smoothing method. The results of this research minimise the occurrence of stockouts and overstocks of clear PET plastic raw materials, so that production runs optimally.
References
[1] M. Imron Mas’ud and D. E. Pratiwi, “Perencanaan dan Pengendalian Bahan Baku Cup 220 ml Dengan Pendekatan Material Requirement Planning di PT Tirta Sukses Perkasa Sukorejo,” J. Res. Technol., vol. 9, no. 1, pp. 1–13, 2023, doi: 10.55732/jrt.v9i1.845.
[2] J. D. Octaviani and R. Fitriani, “Analisis Pengendalian Persediaan Bahan Baku Menggunakan Metode Min-max Stock Pada PT.XYZ,” J. Has. Penelit. dan Karya Ilm. Dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 231–235, 2022.
[3] M. F. Saripudin and Wahyudin, “Perbandingan Pengadaan Persediaan Bahan Baku Dengan Menggunakan Metode EOQ dan Min Max pada PT XYZ,” J. Serambi Eng., vol. 9, no. 1, pp. 7968–7977, 2023, doi: 10.32672/jse.v9i1.808.
[4] N. I. Bawono and A. Erik, “Analisis Safety stock dan Reorder point Persediaan Bahan Baku Produk Barside K-59 di PT. XYZ,” J. Serambi Eng., vol. VIII, no. 3, pp. 6429–6436, 2023.
[5] W. P. Simatupang and W. Winarno, “Pengendalian Bahan Baku Flavor Menggunakan Klasifikasi Abc-Fsn Dan Periodic Review Method Untuk Menentukan Tingkat Persediaan Optimum,” Sigma Tek., vol. 5, no. 1, pp. 039–046, 2022, doi: 10.33373/sigmateknika.v5i1.4179.
[6] H. Winarno, “Pengendalian Persediaan Bahan Baku Batu Bara Menggunakan Metode Min-max di PT. XYZ,” J. Manuhara Pus. Penelit. Ilmu Manaj. dan Bisnis, vol. 2, no. 1, p. 199, 2024, doi: https://doi.org/10.61132/manuhara.v2i1.457.
[7] A. Haslindah, I. Idrus, L. Husnar, and A. Alpitasari, “Optimasi Persediaan Produk Jadi Di CV . Amanda Dengan Menggunakan Metode Min-Max,” J. Ind. Eng. Manag., vol. 02, no. 2, pp. 59–64, 2021, doi: https://doi.org/10.47398/justme.v2i02.19.
[8] A. Bakhtiar and S. Audina, “Analisis Pengendalian Persediaan Aux Raw Material Menggunakan Metode Min-Max Stock Di PT. Mitsubishi Chemical Indonesia,” J@ti Undip J. Tek. Ind., vol. 16, no. 3, pp. 161–168, 2021.
[9] N. L. Rachmawati and M. Lentari, “Penerapan Metode Min-max untuk Minimasi Stockout dan Overstock Persediaan Bahan Baku,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 8, no. 2, pp. 143–148, 2022, doi: http://dx.doi.org/10.30656/intech.v8i2.4735.
[10] I. G. Katiandagho and R. Trisyanto, “Analisis dan Perancangan ROP , EOQ , Safety Stock Sistem Pengendalian Persediaan Bahan Baku Pada Rumah Makan Bubur Ayam Citarasa,” Jur. Akunt. Politek. Negeri Bandung, vol. 02, no. 01, pp. 45–65, 2021.
[11] Arfiyanto and N. Purnama, “Pelaksanaan Pengendalian Bahan Baku Guna Mencapai Target Produksi PT Kaltim Prima Coal pada Tahun 2021-2022,” Sel. Manaj. J. Mhs. Bisnis Manaj., vol. 01, no. 03, pp. 205–213, 2022, [Online]. Available: https://journal.uii.ac.id/selma/index
[12] F. R. Siboro and R. H. Nasution, “Analisis Pengendalian Persediaan Bahan Baku Dengan Menggunakan Metode Economic Order Quantity (EOQ) Dan Metode Min-Max,” JITEKH, vol. 8, no. 1, pp. 34–40, 2020.
[13] F. K. Zega, T. Hartati, S. Hulu, S. Zebua, and E. Zebua, “Analisis Peramalan ( Forecasting ) Penjualan Tahu dengan Metode Single Moving Average untuk Mengoptimalkan Produksi pada Pabrik Tahu Nias,” Innov. J. Soc. Sci. Res., vol. 4, no. 1, pp. 2931–2942, 2024.
[14] Sylvia, “Implementasi dan Analisa Metode Peramalan Exponential Smoothing dan Weighted Moving Average Untuk Permintaan Produk Minuman Kopi K di CV Fajar Timur Lestari,” J. Ind. Eng. Manag. Res., vol. 3, no. 4, pp. 139–147, 2020.
[15] S. A. Jamal and R. P. Hasibuan, “Penerapan Metode Forecasting Pada Pemakaian Bahan Baku Pada Unit Rawmill Pt Xy,” J. Tek. Ibnu Sina, vol. 8, no. 02, pp. 129–138, 2023, doi: 10.36352/jt-ibsi.v8i02.730.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Nadya Novianti Ramadhani, Tranggono (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
