Identifikasi dan Pengendalian Bahaya K3 Pada Aktivitas Suplai Air Bersih untuk Kapal di Dermaga XYZ Menggunakan Metode JSA dan HIRARC
Keywords:
hirarc, identifikasi bahaya, jsa, k3, safetyAbstract
The water supply activity at XYZ Dock is a high-risk work area. The purpose of this research is to identify hazard risks and provide suggestions for controlling occupational safety and health (OSH) hazards at XYZ Pier. The methods used in this research are Job Safety Analysis Hazard Identification (JSA) and Hazard Risk Assessment and Control (HIRARC). Based on the results obtained from the identification of hazards in each water supply activity, the data obtained in the hose laying activity has 4 medium hazards and 2 low hazards. In the clean water distribution activity, there is 1 high risk, 2 medium risks and 1 low risk. In the activity of releasing the hose there is 1 risk of medium value and 3 risks of low value. After risk control, there is 1 medium risk and 5 low risks in the hose laying activity. In the clean water distribution activity there is 1 medium value risk and 3 low value risks. In the hose removal activity, there is 1 risk of medium value and 3 risks of low value. Therefore, this investigation is able to reduce the risk of potential hazards in the clean water supply activities at XYZ pier.
References
[1] Y. Ilmansyah, N. A. Mahbubah and D. Widyaningrum, "Penerapan Job Safety Analysis Sebagai Upaya Pencegahan Kecelakaan Kerja dan Perbaikan Keselamatan Kerja di PT Shell Indonesia," Jurnal Profisiensi, vol. 8, pp. 15-22, 2020.
[2] S. Darmayani, A. Sa'diyah, Supiati, M. Muttaqin, F. rachmawati, C. Widia, M. L. Pattiapon, E. P. Rahayu, D. Indiyati, Sunarsieh, E. Bachtiar, E. P. Rahayu and R. F. Meditama, Kesehatan dan Keselamatan Kerja (K3), Bandung: Widina Bhakti Persada Bandung, 2023.
[3] S. Sari, Hayati, A. Dzaki and W. Juliansyah, "Analisis Risiko Kesehatan dan Keselamatan Kerja Pada Pabrik Tahu Bapak Paimin dengan Metode HIRA," JISI: Jurnal Integrasi Sistem Industri, vol. 10, pp. 2-7, 2023.
[4] F. Rakhman, D. Andesta and A. Waiusr, "Identifikasi Bahaya Kecelakaan Kerja Di PT. Toshin Prima Fine Blanking Menggunakan Metode Job Safty Analysis dan Hazard Identification, Risk Assessment dan Risk Control," JUSTI: Jurnal Sistem Dan Teknik Industri, vol. 2, pp. 222-230, 2022.
[5] T. Nurhayati, A. Shabrina, D. N. Islami and A. M. Suyono, "Identifikasi Bahaya dengan Metode Job Safety Analysis di PT XYZ," Jurnal logistic & Supply Chain (LOGIC), vol. 1, pp. 73-77, 2022.
[6] Sofyan and Maulana, "Analisis Bahaya dan Risiko K3 Dengan Metode HIRARC Pada Area Dieshop di PT XYZ Plant 2.," SISTEMATIK (Jurnal Ilmiah Nasional Bidang Ilmu Teknik), pp. 21-26, 2022.
[7] D. S. Urrohmah and D. Riandadari, "Identifikasi Bahaya degan Metode Hazard Identification, Risk Assesment anf Risk Control (HIRARC) dalam Upaya Memperkecil Kecelakaan Kerja di PT. PAL indonesia.," Jurnal Pendidikan Teknik Mesin, vol. 8, pp. 34-40, 2019.
[8] G. L. Pradana, F. Handoko and H. Galuh, "Pengendalian Risiko Kecelakaan Kerja dengan Pendekatan Hazard Identification, Risk Assesment, And Risk COntrol (HIRARC) (Studi Kasus UD. Tohu Srijaya, Batu-Jawa Timur).," Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), vol. 5, pp. 10-18, 2022.
[9] A. F. Rohman and B. I. Putra, "Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Produksi Beton Dengan Metode JSA Dan Hirarc di PT Varia Usaha Beton," MATRIK: Jurnal Manajemen dan Teknik Industri-Produksi, vol. XXIV, pp. 209-224, 2024.
[10] F. Azzahra, E. P. Nurlaili and J. D. Ratisan, "Analisis Risiko Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (Hirarc) di PT Indo Java Rubber Planting Co," Jurnal Agrifoodtech, vol. 1, pp. 21-35, 2022.
[11] D. F. Hidayat and J. Hardono, "Penerapan Metode HIRADC pada Bagian Proses Penerimaan di PT. CA," Jurnal Industrial Manufacturing, vol. 6, pp. 87-92, 2021.
[12] N. L. Surya and K. R. Ririh, "Analisis Risiko Kecelakaan Kerja Menggunakan Metode Analisis Risiko Kecelakaan Kerja Menggunakan Metode PT DRA Component Persada.," Go-Integratif : Jurnal Teknik Sistem dan Industri, vol. 2, pp. 135-152, 2021.
[13] M. I. Hamdani and D. Andesta, "Analisis Potensi Bahaya Menggunakan Metode JSA dan HIRARC untuk Mengurangi Angka Kecelakaan Kerja pada Area Workshop Fabrikasi PT. ABC.," G-Tech : Jurnal Teknologi Terapan, vol. 8, pp. 887-895, 2024.
[14] M. D. P. Rahman, E. D. Priyana and A. W. Rizqi, "Job Safety Analysis (JSA) Sebagai Upaya Pengendalian Resiko Kecelakaan Kerja Pada Pekerjaan Fabrication Dd PT. Wilmar Nabati Indonesia.," Jurnal Teknik Sains, vol. 7, pp. 99-109, 2022.
[15] I. P. Salsabillah, Hidayat and A. W. Rizqi, "Analisis Risiko dan Upaya Pengendalian K3 di Area Workshop Bagian Pengelasan Pada Garasi Angkutan Luar PT. XYZ Dengan Metode Job Safety Analys (JSA).," JUSTI : Jurnal Sistem Dan Teknik Industri, vol. 4, pp. 174-179, 2023.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Yanita Vidya Pramesthi, Tranggono (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
