Analisis Performa Heater Pada Unit Heat Transfer Medium di Polymer Plant dengan Produk Sumber Pemanas

Puput Puput Ayu Wulandari; Hilman Hilman Imadul Umam; Aurelius  Aurelius Airlangga Suryo Wicaksono

Authors

Puput Ayu Wulandari Program Studi Teknik Kimia, Universitas Singaperbangsa Karawang Author https://orcid.org/0009-0007-8479-4889
Hilman Imadul Umam Program Studi Fisika, Universitas Singaperbangsa Karawang Author
Aurelius Airlangga Suryo Wicaksono Program Studi Teknik Kimia, Universitas Pembangunan Nasional "Veteran" Yogyakarta Author

Keywords:

Efisiensi , Heat loss, Heater, natural gas, specific consumption

Abstract

One of the main requirements in polymer processing is heat. A fired heater is used in the Heat Transfer Medium unit to obtain heat. The efficiency, heat loss, and specific consumption of fired heaters greatly impact the efficiency of energy use in processing. According to SNI, to maintain the efficiency of the fired heater, it is necessary to periodically review its performance using direct and walkthrough methods. The analysis results from three consecutive days showed an efficiency of 87%, 89%, and 89%. The heat loss was 13%, 11%, and 11%. The specific consumption was 70.66, 72.65, and 72.69 Nm³/ton. Overall, these values meet SNI standards: 92% efficiency, 10-15% heat loss, and ≥74 Nm³/ton specific consumption. However, to maintain or increase the efficiency value, it is necessary to monitor operating conditions and conduct regular periodic checks to prevent system leaks that increase heat loss and reduce efficiency.

References

[1] Zdenek, Jiri Vondal, Jiri Hajek,"Standards for fired heater design: An assessment based on computational modelling," Applied Thermal Engineering., vol.89, pp.1068-1078,2015.

[2] Behnaz Rahmatmand, Mohammad Reza Rahimpour "Hazardous materials and dust release in disasters of oil, gas, and petrochemical units," Fire Triangle., 2023.

[3] Choirul Anam, dkk., "Analisis Peningkatan Efisiensi Direct-Fired Heater," ISSN: 2548-3854, Vol. 2, No. 2, 2018.

[4] Yunira Ayu Saputri,dkk.,"Analisis efisiensi heater pada pengolahan steam pada pengolahan steam unit 7 pembangkit listrik tenaga uap," Distilat, 8 (1), 54-63., 2023.

[5] Anggiansyah,Reza,"Analisis Kinerja Sistem Kontrol Fuel Gas Heater Tipe Feed Water Treatment Efisiensi Gas Turbin Tipe F di PLTGU," 2020.

[6] M. Shekarchian,dkk.," Energy, exergy, environmental and economic analysis of industrial fired heaters based on heat recovery and preheating techniques," Energy Conversion and Management,vol 71, pp 51-61, 2013.

[7] SH Pranolo,dkk.,"Kajian Konsumsi Energi Spesifik Sektor Industri Kimia Di Indonesia Sebagai Acuan Efisiensi Energi," Prosiding SNTK Eco-SMART,vol 1, no 1, 2019.

[8] Hosokai Sou, Matsuoka Koichi, Kuramoto Koji, Suzuki Yoshizo,"Modification of Dulong's formula to estimate heating value of gas, liquid and solid fuels," Fuel Processing Technology. 152: 399–405, 2016.

[9] Carl L. Yaws,"Chemical Properties Handbook: Physical, Thermodynamic, Environmental Transport, Safety, and Health Related Properties for Organic and Inorganic Chemicals" McGraw-Hill Education, 1999.

[10] Holman, J.P. 1993. heat transfer, Erlangga, Edition 6th, Jakarta.

[12] Winanti, W. S. & Prayudi, T.,"Efisiensi Boiler pada Industri Tepung Terigu," Jurnal Teknik Lingkungan, pp. 58-65, 2006.

[13] Kementerian Perindustrian, "Spesific Consumption Energy"Jakarta:Indonesia, 2011.

[14] L. B. Theodore, S. L. Andrienne, P. I. Frank and P. D. David, "Fundamentals of Heat and Mass Transfer," United States of AmericaJohn Wiley & Sons,2011.

[15] David M. Himmelblau dan James B. Riggs,"Basic Principles and Calculations in Chemical Engineering" Ed 8th, 1993.

[16] Perry, R.H.,“Perry’s Chemical Engineers’ Handbook,” Mc. Graw Hill Book Company, United States of America, 8th edition, 1997.