Strategi Pengelolaan Operasional untuk Meningkatkan Keuntungan dan Mengurangi Pengeluaran dalam Industri Daur Ulang Plastik
Keywords:
Plastic recycling, lean manufacturing, IoT technology, circular economy, operational efficiencyAbstract
The plastic recycling industry holds significant potential to reduce environmental impact and create new economic value. However, this industry faces challenges such as high production costs, process inefficiencies, and increasing sustainability demands. This article discusses operational management strategies, including the implementation of lean manufacturing, IoT-based smart technologies, and circular economy principles. Lean manufacturing focuses on waste reduction and efficiency improvement, while IoT enables real-time data analysis to detect and resolve inefficiencies. The adoption of circular economy principles demonstrates a reduction in the use of new raw materials, production costs, and waste. The findings reveal that combining these strategies enhances operational efficiency, reduces expenditures, and supports environmental sustainability. This article provides recommendations for the plastic recycling industry to innovate continuously in addressing global challenges
References
[1] L. Malihah and A. Nazairin, “Sampah Plastik Sachet Dalam Perspektif Pembangunan Berkelanjutan,” YUME J. Manag., vol. 7, no. 1, pp. 198–210, 2024.
[2] N. M. N. B. S. Dewi, “Studi Literatur Penggunaan Sampah Plastik MenjadI Produk Kreatif,” Sos. Sains Dan Teknol., vol. 2, no. 1, pp. 175–182, 2022.
[3] Z. Arifin et al., Green Technology: Penerapan Teknologi Ramah Lingkungan Berbagai Bidang. PT. Sonpedia Publishing Indonesia, 2023.
[4] A. Charviandi, R. Harni, R. Noristaman, Y. Suhartini, D. Sandya, and Y. Yusnaini, “Optimalisasi Produksi Dan Strategi Pemasaran Jamur Tiram Putih Villa Mushroom Agrifarm Bandung,” in The Proceeding of Community Service and Engagement (COSECANT) Seminar, 2023, pp. 327–330.
[5] E. R. Lestari, Manajemen inovasi: Upaya meraih keunggulan kompetitif. Universitas Brawijaya Press, 2019.
[6] S. Oktavilia, P. I. Putri, I. F. S. Wahyuningrum, and N. R. Kistanti, Potensi Ekonomi Sampah. Penerbit NEM, 2024.
[7] R. Hossain, M. T. Islam, A. Ghose, and V. Sahajwalla, “Full circle: Challenges and prospects for plastic waste management in Australia to achieve circular economy,” J. Clean. Prod., vol. 368, p. 133127, 2022.
[8] E. Andina, “Analisis perilaku pemilahan sampah di Kota Surabaya,” Aspir. J. Masal. Sos., vol. 10, no. 2, pp. 119–138, 2019.
[9] J. Banjarnahor, S. M. Gultom, L. B. Lahera, and R. Nainggolan, “Efektivitas Penerapan Hukum dalam Penanggulangan Sampah Sembarangan di Kota Medan: Sebuah Studi Literatur,” J. Ilm. Nusant., vol. 2, no. 1, pp. 28–44, 2025.
[10] N. R. Nurwulan, “Penerapan Lean Manufacturing di Industri Makanan dan Minuman: Kajian Literatur,” Ikraith-Ekonomika, vol. 4, no. 2, pp. 62–68, 2021.
[11] O. K. A. R. Damanik, V. M. Afma, and B. A. H. Siboro, “Analisa Pendekatan Lean Manufacturing Dengan Metode VSM (Value Stream Mapping) Untuk Mengurangi Pemborosan Waktu (Studi Kasus UD. Almaida),” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 5, no. 1, 2017.
[12] M. Abdullah and M. Z. Abedin, “Assessment of plastic waste management in Bangladesh: A comprehensive perspective on sorting, production, separation, and recycling,” Results in Surfaces and Interfaces, vol. 15, p. 100221, 2024.
[13] U. Rehman, “Development of optical sorting machine.” Aydın Adnan Menderes Üniversitesi, Fen Bilimleri Enstitüsü, 2022.
[14] A. Mofolasayo, S. Young, P. Martinez, and R. Ahmad, “How to adapt lean practices in SMEs to support Industry 4.0 in manufacturing,” Procedia Comput. Sci., vol. 200, pp. 934–943, 2022.
[15] N. Modig and P. Åhlström, This is lean: Resolving the efficiency paradox, vol. 41. Rheologica Stockholm, 2012.
[16] M. Christopher, Logistics and supply chain management. Pearson Uk, 2022.
[17] A. P. O. Amane et al., Pemanfaatan dan Penerapan Internet Of Things (Iot) Di Berbagai Bidang. PT. Sonpedia Publishing Indonesia, 2023.
[18] A. Sariwardani and S. E. M. Si, “Manajemen Produksi dan Operasi,” Manaj. Produksi dan Operasi Era Revolusi Ind. 4.0, p. 35, 2024.
[19] M. Wei, S. H. Hong, and M. Alam, “An IoT-based energy-management platform for industrial facilities,” Appl. Energy, vol. 164, pp. 607–619, 2016.
[20] S. Huda, T. B. Imansah, and E. D. Hartono, “Prototipe Monitoring Daya Listrik dan Pengendalian Perangkat Elektronik Skala Industri Berbasis IoT di CV. Wellracom Nusantara Surabaya,” J. Inform. Merdeka Pasuruan, vol. 6, no. 3, p. 465851, 2022.
[21] I. Lee and K. Lee, “The Internet of Things (IoT): Applications, investments, and challenges for enterprises,” Bus. Horiz., vol. 58, no. 4, pp. 431–440, 2015.
[22] J. Gubbi, R. Buyya, S. Marusic, and M. Palaniswami, “Internet of Things (IoT): A vision, architectural elements, and future directions,” Futur. Gener. Comput. Syst., vol. 29, no. 7, pp. 1645–1660, 2013.
[23] T. Davenport, Big data at work: dispelling the myths, uncovering the opportunities. Harvard Business Review Press, 2014.
[24] M. R. Sitompul, “Ekonomi sirkular dalam pengembangan bisnis penerbangan di Indonesia,” War. Penelit. Perhub., vol. 35, no. 1, pp. 49–58, 2023.
[25] W. D. Febrian and A. Solihin, “Edukasi Ekonomi Sirkular: Solusi Pengelolaan Sampah Yang Ramah Lingkungan Dan Berdayaguna,” J. Pengabdi. Masy. Dan Penelit. Terap., vol. 2, no. 2, pp. 50–56, 2024.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Samsul Ikhbar, Nelly, Maksalmina, Chairul Amni (Author); Arsyad, Ahmad Aulia Fansuri (Translator)
This work is licensed under a Creative Commons Attribution 4.0 International License.
