Strategi Pemilihan Bahan Baku Daur Ulang untuk Meningkatkan Profitabilitas di Industri Pengolahan Limbah Plastik
Keywords:
Plastic waste, recycled raw materials, profitability, production efficiency, recycling technologyAbstract
The plastic waste recycling industry plays a crucial role in reducing environmental impacts while creating economic value through recycling. This study aims to identify strategies for selecting recycled raw materials that can enhance the profitability of the plastic recycling industry. Using a literature review approach, the study explores various sources of raw materials, such as household, industrial, and commercial waste and analyzes their quality, contamination levels, and processing costs. The findings indicate that high-quality raw materials with low contamination levels, such as industrial waste, result in higher production efficiency and lower costs compared to other materials. Additionally, the adoption of modern technologies such as chemical recycling can increase production efficiency by up to 85%. This study contributes by providing a strategic framework for selecting appropriate raw materials, supporting both environmental sustainability and industry profitability.
References
Referensi
[1] M. Z. Hakim, “Pengelolaan dan pengendalian sampah plastik berwawasan lingkungan,” Amanna Gappa, pp. 111–121, 2019.
[2] A. W. Setiabudi, T. M. Tarigan, and C. Y. Prasetyo, “Konstruksi Insentif Pajak Terhadap Industri Daur Ulang Plastik Dalam Rangka Penanganan Sampah Plastik Di Indonesia,” Pros. Work. Pap. Ser. Manag., vol. 15, no. 2, pp. 338–355, 2023.
[3] Y. Kazancoglu, I. Kazancoglu, and M. Sagnak, “A new holistic conceptual framework for green supply chain management performance assessment based on circular economy,” J. Clean. Prod., vol. 195, pp. 1282–1299, 2018.
[4] S. Shahbazi, M. Wiktorsson, M. Kurdve, C. Jönsson, and M. Bjelkemyr, “Material efficiency in manufacturing: Swedish evidence on potential, barriers and strategies,” J. Clean. Prod., vol. 127, pp. 438–450, 2016.
[5] J. N. Hahladakis, E. Iacovidou, and S. Gerassimidou, “Plastic waste in a circular economy,” in Environmental Materials and Waste, Elsevier, 2024, pp. 99–134.
[6] T. Hennebel, N. Boon, S. Maes, and M. Lenz, “Biotechnologies for critical raw material recovery from primary and secondary sources: R&D priorities and future perspectives,” N. Biotechnol., vol. 32, no. 1, pp. 121–127, 2015.
[7] P. Sormunen and T. Kärki, “Recycled construction and demolition waste as a possible source of materials for composite manufacturing,” J. Build. Eng., vol. 24, p. 100742, 2019.
[8] H. Dahlbo, V. Poliakova, V. Mylläri, O. Sahimaa, and R. Anderson, “Recycling potential of post-consumer plastic packaging waste in Finland,” Waste Manag., vol. 71, pp. 52–61, 2018.
[9] J. R. Jambeck et al., “Plastic waste inputs from land into the ocean,” Science (80-. )., vol. 347, no. 6223, pp. 768–771, 2015.
[10] E. MacArthur, “The new plastics economy: Rethinking the future of plastics & catalysing action,” Ellen MacArthur Found. Cowes, UK, vol. 68, 2017.
[11] K. P. Gopinath, V. M. Nagarajan, A. Krishnan, and R. Malolan, “A critical review on the influence of energy, environmental and economic factors on various processes used to handle and recycle plastic wastes: Development of a comprehensive index,” J. Clean. Prod., vol. 274, p. 123031, 2020.
[12] I. Antonopoulos, G. Faraca, and D. Tonini, “Recycling of post-consumer plastic packaging waste in the EU: Recovery rates, material flows, and barriers,” Waste Manag., vol. 126, pp. 694–705, 2021.
[13] J.-C. Chen and M.-S. Huang, “Transfer learning to predict part quality for injection molding with recycled materials,” Int. J. Adv. Manuf. Technol., pp. 1–16, 2024.
[14] S. Spierling et al., “Bio-based plastics-A review of environmental, social and economic impact assessments,” J. Clean. Prod., vol. 185, pp. 476–491, 2018.
[15] R. Geyer, J. R. Jambeck, and K. L. Law, “Production, use, and fate of all plastics ever made,” Sci. Adv., vol. 3, no. 7, p. e1700782, 2017.
[16] S. Nižetić, N. Djilali, A. Papadopoulos, and J. J. P. C. Rodrigues, “Smart technologies for promotion of energy efficiency, utilization of sustainable resources and waste management,” J. Clean. Prod., vol. 231, pp. 565–591, 2019.
[17] N. Singh, D. Hui, R. Singh, I. P. S. Ahuja, L. Feo, and F. Fraternali, “Recycling of plastic solid waste: A state of art review and future applications,” Compos. Part B Eng., vol. 115, pp. 409–422, 2017.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Ulfia, Rahmi, Zulfan Yusuf, Radhiana, Mukhdasir, Ajrina Humaira (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
