Development of Eco-Friendly Biocomposite Films Based on Whey Protein Isolate and Carboxymethyl Cellulose with Silica as a Filler

Azwar; Mukhlishien

Authors

Azwar Universitas Syiah Kuala Author
Mukhlishien Universitas Syiah Kuala Author

Keywords:

Biocomposite film, Whey protein isolate (WPI), Carboxyl methyl cellulose (CMC), Silica filler, Biodegradable packaging

Abstract

This research endeavor focuses on the development of biodegradable composite films. The constituents utilized comprise Whey Protein Isolate (WPI) and Carboxymethyl Cellulose (CMC). Additionally, varying quantities of silica filler are incorporated into the formulations. Films were created using two different CMC amounts (0.75g and 1g) and varying silica levels (0g, 0.05g, 0.15g, 0.25g, 0.35g, and 0.45g). The research systematically examined how the addition of silica affected the films' thickness (which increased from 0.126 mm to 0.371 mm with higher silica content), water absorption, biodegradability, and surface structure. Silica addition also reduced water absorption significantly, improving the film’s resistance to swelling. Biodegradation tests showed all samples met the SNI biodegradability standard (>60%), although higher silica levels reduced the rate of degradation due to its hydrophobic nature. SEM analysis illustrated that films with added silica exhibited smoother, denser surfaces with fewer voids, indicating improved particle distribution and better structural integrity. Overall, the incorporation of silica and CMC successfully enhanced the functional performance of WPI-based biocomposite films. The optimal silica concentration (0.05–0.25 g) provided a good balance between mechanical strength, water resistance, and environmental degradability.

References

[1] S. Alfei, B. Marengo, and G. Zuccari, “Nanotechnology application in food packaging: A plethora of opportunities versus pending risks assessment and public concerns,” Food Res. Int., vol. 137, no. April, p. 109664, 2020, doi: 10.1016/j.foodres.2020.109664.

[2] S. P. Roohi, K. Bano, M. R. Zaheer, and M. Kuddus, “Biodegradable smart biopolymers for food packaging: Sustainable approach toward green environment,” Bio-based Mater. Food Packag. Green Sustain. Adv. Packag. Mater., pp. 197–216, 2018, doi: 10.1007/978-981-13-1909-9_9.

[3] B. Gökkaya Erdem, S. Dıblan, and S. Kaya, “Development and structural assessment of whey protein isolate/sunflower seed oil biocomposite film,” Food Bioprod. Process., vol. 118, pp. 270–280, 2019, doi: 10.1016/j.fbp.2019.09.015.

[4] M. Asgher, S. A. Qamar, M. Bilal, and H. M. N. Iqbal, “Bio-based active food packaging materials: Sustainable alternative to conventional petrochemical-based packaging materials,” Food Res. Int., vol. 137, p. 109625, 2020, doi: 10.1016/j.foodres.2020.109625.

[5] S. Qin, H.S.H Sun, X. Wan, Y.W.Y. Wu, X. L.X. Lin, H. K.H. Kan, D. H.D. Hou, Z.Z. Zheng, X.H.X. He, C.L.C. Liu. Carboxymethylcellulose reinforced starch films and rapid detection of spoiled beverages. Front. Bioeng. Biotechnol., 06 January 2023. Sec. Bioprocess Engineering. Volume 10 - 2022 | https://doi.org/10.3389/fbioe.2022.1099118

[6] Z. Cai, J. Wu, B. Du, and H. Zhang, “Impact of distribution of carboxymethyl substituents in the stabilizer of carboxymethyl cellulose on the stability of acidified milk drinks,” Food Hydrocoll., vol. 76, pp. 150–157, 2018, doi: 10.1016/j.foodhyd.2016.12.034.

[7] M. B. Ihsan and Ratnawulan, “Effect of Carboxymethyl Cellulose (CMC) Addition on the Quality of Biodegradable Plastic from Corn Cob,” J. Penelit. Pendidik. IPA, vol. 9, no. 7, pp. 5117–5125, 2023, doi: 10.29303/jppipa.v9i7.4010.

[8] I. Zuwanna, M. Riza, S. Aprilia, and Y. Syamsuddin, “Biocomposite based on whey protein isolate with the addition silica from rice husk ash,” Mater. Today Proc., vol. 63, pp. S147–S152, 2022, doi: 10.1016/j.matpr.2022.02.056.

[9] I. Zuwanna, M. Riza, S. Aprilia, Y. Syamsuddin, and R. Dewi, “South African Journal of Chemical Engineering Preparation and characterization of silica from rice husk ash as a reinforcing agent in whey protein isolate biocomposites film,” South African J. Chem. Eng., vol. 44, no. February, pp. 337–343, 2023, doi: 10.1016/j.sajce.2023.03.005.

[10] C. Xu and Z. Cheng, “Thermal stability of ionic liquids: Current status and prospects for future development,” Processes, vol. 9, no. 2, pp. 1–36, 2021, doi: 10.3390/pr9020337.

[11] Z. Yang, H. Peng, W. Wang, and T. Liu, “Crystallization behavior of poly(ε-caprolactone)/layered double hydroxide nanocomposites,” J. Appl. Polym. Sci., vol. 116, no. 5, pp. 2658–2667, 2010, doi: 10.1002/app.

[12] R. S. Riseh, G. V. Mozhgan, and H. Mohadeseh, "Micro-/Nano Carboxymethyl As a Promising Biopolymer With Propects In The Agriculture Sector," : A Review. Journal Polymers., vol 15, no. 2, pp. 1-23, 2023, doi: 10.23960/jtaf.v10i1.2898.

[13] S. S. Udjiana, S. Hardiantoro, M. Syarwani, dan P. H. Suharti, "Pembuatan dan Karakterisasi Plastik Biodegrabale dari Umbi Talas (Xanthosoma sagittifolium) dengan Penambahan Filler Kitosan dan Kalsium Silikat," Jurnal Teknik Kimia dan Lingkungan., vol. 3, no. 1, pp. 10-19, 2019, doi: 10.1080/17480272.2021.1955972.

[14] T. Huq et al., “Nanocrystalline cellulose (NCC) reinforced alginate based biodegradable nanocomposite film,” Carbohydr. Polym., vol. 90, no. 4, pp. 1757–1763, 2012, doi: 10.1016/j.carbpol.2012.07.065.

[15] R. S. Riseh, G. V. Mozhgan, and H. Mohadeseh, "Micro-/Nano Carboxymethyl As a Promising Biopolymer With Propects In The Agriculture Sector," : A Review. Journal Polymers., vol 15, no. 2, pp. 1-23, 2023, doi: 10.23960/jtaf.v10i1.2898.