Integrasi Data Untuk Pemodelan 3D Interior dan Eksterior Masjid Al-Syuro Cipari

Jouristiany; Gusti Ayu Jessy Kartini

Authors

Jouristiany Institut Teknologi Nasional Bandung Author
Gusti Ayu Jessy Kartini Institut Teknologi Nasional Bandung Author

Keywords:

integrasi data, terrestrial laser scanner, handheld laser scanner, pemodelan 3d, bangunan cagar budaya

Abstract

Accurate and comprehensive documentation is required for the long-term conservation of heritage buildings. This study aims to integrate the interior and exterior data of the Al-Syuro Cipari Mosque using 3D modelling and a combination of terrestrial laser scanning (TLS) and handheld laser scanning (HLS). Two integration methods were compared — free-net and independent georeferencing — to determine the most effective approach. Data was acquired using a Leica RTC360 TLS for exterior areas and a Leica BLK2GO HLS for hard-to-reach interior areas, particularly the ablution area and the mosque tower. The results showed that both methods successfully integrated the interior and exterior data without any gaps in the transition zones where the architectural elements were clearly defined. Free-net georeferencing produced models with an RMSE of 0.003 m and 66% overlap, whereas independent georeferencing offered greater processing flexibility, albeit with the need for special attention to be paid to systematic errors. Statistical tests revealed no significant discrepancies between the actual dimensions of the objects and the point cloud models in either method. The resulting integrated 3D model can be used to document, maintain and conserve heritage buildings with adequate geometric accuracy.

References

[1] A. Gardzińska, "Application of Terrestrial Laser Scanning For The Inventory of Historical Buildings On The Example of Measuring The Elevations of The Buildings In The Old Market Square In Jaroslaw," Sciendo, pp. 0293-0309, 2021.

[2] A. Keitaanniemi, J.-P. Virtanen, P. Rönnholm, A. Kukko, T. Rantanen and M. T. Vaaja, "The Combined Use of SLAM Laser Scanning and TLS for the 3D Indoor Mapping," Buildings, vol. 11, p. 386, 2021.

[3] A. D. Murtiyoso, "Gespatial Recording and Point cloud Classfication of Heritage Buildings," Université de Strasbourg, English, 2020.

[4] C. Altuntas, F. Yildiz and M. Scaioni, "Laser Scanning and Data Integration for Three-Dimensional Digital Recording of Complex Historical Structures: The Case of Mevlana Museum," International Journal of Geo-Information, pp. 5-18, 2016.

[5] D. S. Bismoko, "Analisis Teknologi Masjid Cipari Yang Bergaya Arsitektur Indo-Eropa," Kalpataru, vol. 30, pp. 127-140, 2021.

[6] L. Yondri, "Naskah Rekomendasi Penetapan Status dan Pemeringkatan Masjid "Sjoero" Cipari Sebagai Bangunan Cagar Budaya Peringkat Kabupaten Garut," Balai Pelestarian Kebudayaan, Bandung, 2023.

[7] S. Liu and M. J. Bin Mamat, "Application of 3D laser scanning technology for mapping and accuracy assessment of the point cloud model for the Great Achievement Palace heritage building," Heritage Science, vol. 12, p. 153, 2024.

[8] R. Gao, J. Park, X. Hu, S. Yang and K. Cho, "Reflective Noise Filtering of Large-Scale Point cloud Using Multi-Position LiDAR Sensing Data," Remote Sensing, vol. 13, p. 16, 2021.

[9] G. B. . J. Aji and H. Ilmawan, "Pembuatan Model 3 Dimensi Metode Manual Pada Gedung Juang 45 Bekasi Menggunakan Integrasi Point Cloud Hasil Pengolahan Data Foto Terestris Dan Aerial Dengan Menggunakan Metode Structure From Motion (SFM) Dan Multi-View Stereo (MVS)," Ellipsoida: Jurnal Geodesi dan Geomatika, vol. 08, 2025.

[10] A. Conti, G. Pagliaricci, V. Bonora and G. Tucci, " A Comparison Between Terrestrial Laser Scanning And Hand-Held Mobile Mapping For The Documentation Of Built Heritage," The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vols. XLVIII-2, pp. 141-147, 2024.