Evaluasi Lingkungan Kerja (Intensitas Cahaya, Kelembaban, Suhu, dan Kebisingan) Menggunakan Metode Simple Random Sampling dan HIRADC pada PT.Vitapharm
Keywords:
HIRADC, Intensitas Cahaya, Kebisingan, Kelembaban, SuhuAbstract
This evaluation of the working environment was carried out in order to improve health and safety at work (K3), reduce the risk of accidents at work and optimise the psychological state of the employees. The research was carried out by taking measurements in all rooms of the Quality Control Building, 1st floor and dining room. The data was analysed using Microsoft Excel software. The data was then analysed using the HIRADC method. In the noise measurements, the room with the highest noise is the Chemical Physics Laboratory Room at 81.21 dB. Then, when measuring humidity, the room with the highest humidity is the changing room at 68.90%. In the light intensity measurement, the room with the highest light intensity is the Returns Room at 1686 lux. In the temperature measurement, the room with the highest temperature is the laundry room at 33.20°C. The HIRADC analysis is then carried out to identify potential hazards that may occur and to determine improvements that can be made. Based on the HIRADC analysis, there are 7 that are in the low risk category, which has a risk level range of 1-4, marked in green. There are 9 that are in the medium risk category between 5-9 which is marked in yellow. Then there are 4 in the high risk category between 10-16, which are marked in orange. This means that the risks in the high category require in-depth action.
References
[1] Y. Saraswati, A. Ridwan, and A. Iwan Candra, “Analisis Penerapan Keselamatan Dan Kesehatan Kerja (K3) Pembangunan Gedung Kuliah Bersama Kampus C Unair Surabaya,” J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 2, p. 247, 2020, doi: 10.30737/jurmateks.v3i2.1111.
[2] M. R. Chandra, “Analisis Ergonomi Lingkungan Kerja Fisik Berdasarkan Temperatur , Pencahayaan Dan Tingkat Kebisingan Mesin Studi Kasus PTPN VIII Dayeuhmanggung,” Pros. Mhs. Semin. Nas. Unimus, vol. 2, pp. 585–595, 2019, [Online]. Available: https://prosiding.unimus.ac.id/index.php/mahasiswa/article/viewFile/515/518
[3] S. Eko and M. E. Dr. Andi Tirta, M. Sc Haryandi, S.T, “Evaluasi Penerapan Permenaker No. 5 2018 Di PT . XYZ Pabrik Pengolahan Padi Jagung Cabang Sumbawa,” vol. 4, no. 3, pp. 41–50, 2020.
[4] W. Rohmatillah, D. Sari, T. Yuniastuti, S. Widyagama, H. Malang, and W. Rohmatillah, “Analisa Strategi Proaktif Dalam Mencegah Risiko Bahaya Dengan Metode Hiradc Di Cv X Pakis,” Media Husada J. Environ. Heal., vol. 1, no. 1, pp. 28–35, 2021.
[5] A. Y. Markus and Z. Djunaidi, “Hazard Identification, Risk Assessment and Determining Control (Hiradc) Pada Kegiatan Perawatan Rolling Stock Equipment Di Tambang Bawah Tanah Pt. X,” J. Ilm. Manajemen, Ekon. Akunt., vol. 8, no. 2, pp. 479–497, 2024, doi: 10.31955/mea.v8i2.4002.
[6] P. K. Arieska and N. Herdiani, “Pemilihan Teknik Sampling Berdasarkan Perhitungan Efisiensi Relatif,” J. Stat., vol. 6, no. 2, pp. 166–171, 2018, [Online]. Available: https://jurnal.unimus.ac.id/index.php/statistik/article/view/4322/4001
[7] D. Pravi and N. Susanto, “PENCEGAHAN KECELAKAAN KERJA ( STUDI KASUS : KOMPARTEMEN JASA PELAYANAN PABRIK PT PUPUK KALIMANTAN TIMUR ) Kompartemen Jasa Pelayanan Pabrik ( JPP ). yaitu Departemen Teknik dan Kontrol Pupuk Kaltim memiliki target zero accident Kaltim perusahaan yang berg,” Ind. Eng. Online J., vol. 13, no. 4, pp. 3–4, 2024.
[8] C. Taher and K. Widiawan, “Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko di Pabrik Roti PT X,” J. Titra, vol. 11, no. 1, pp. 57–64, 2023.
[9] R. Ameliawati, “Penerapan Keselamatan dan Kesehatan Kerja dengan Metode HIRADC (Hazard Identification, Risk Assessment and Determining Control) di Area Plant-Warehouse Implementation of Occupational Safety and Health with The HIRADC (Hazard Identification, Risk Assessmen,” Rang Tek. J., vol. 6, no. 1, pp. 51–64, 2022, [Online]. Available: https://scholar.googleusercontent.com/scholar?q=cache:Trq8QTUWD1EJ:scholar.google.com/+ameliawati+penerapan+k3&hl=id&as_sdt=0,5
[10] D. F. Hidayat and J. Hardono, “Penerapan Metode HIRADC pada Bagian Proses Penerimaan di PT. CA Application of the HIRADC Method in the Receiving Process Section at PT. CA,” J. Ind. Manuf., vol. 6, no. 2, pp. 87–92, 2021.
[11] P. N. Ramadhani and Y. D. Firdausiana, “Noise Exposure and Hearing Loss on Field Operator Compressor House Area,” J. Kesehat. Lingkung., vol. 12, no. 2, pp. 126–135, 2020, doi: 10.20473/jkl.v12i2.2020.126-135.
[12] A. Sasmita, S. Elystia, and J. Asmura, “Evaluasi Tingkat Kebisingan Sebagai Upaya Pengelolaan Kesehatan dan Keselamatan Kerja (K3) Di Unit PLTD/G Teluk Lembu PT PLN Pekanbaru Dengan Metode NIOSH,” J. Sains dan Teknol., vol. 15, no. 2, pp. 34–42, 2016, doi: 10.1088/1757-899X/420/1/012028.
[13] D. Hulu, A. Lahagu, and E. Telaumbanua, “Analisis Lingkungan Kerja Dalam Meningkatkan Produktivitas Kerja Pegawai Kantor Kecamatan Botomuzoi Kabupaten Nias,” J. EMBA, vol. 10, no. 4, pp. 1480–1496, 2022.
[14] A. N. Edar and A. Wahyuni, “Pengaruh Suhu dan Kelembaban Terhadap Rasio Kelembaban dan Entalpi (Studi Kasus: Gedung UNIFA Makassar),” LOSARI J. Arsit. Kota dan Pemukim., vol. 6, no. 2, pp. 102–114, 2021, doi: 10.33096/losari.v6i2.311.
[15] Nurcahyo, “Analisis Kualitas Pencahayaan Ruang Dokter Gigi Sesuai Peraturan Indonesia Di Klinik Kusuma Dental Care 2 Yogyakarta,” Univ. Ahmad Dahlan, vol. 2, no. 1, p. 5, 2023, [Online]. Available: https://jurnalkesmas.co.id
[16] A. Khuriati, “Sistem Pemantau Intensitas Cahaya Ambien dengan Sensor BH1750 Berbasis Mikrokontroler Arduino Nano,” Berk. Fis., vol. 25, no. 13, pp. 105–110, 2022.
[17] B. Guntur and G. M. Putro, “Analisis Intensitas Cahaya Pada Area Produksi Terhadap Keselamatan Dan Kenyamanan Kerja Sesuai Dengan Standar Pencahayaan,” Opsi, vol. 10, no. 2, p. 115, 2017, doi: 10.31315/opsi.v10i2.2106.
[18] Marsha Putri Tasyania, Rahma Fariza, Qurtubi, and Debbie Kemala Sari, “Analisis Lingkungan Kerja Fisik: Suhu dan Kebisingan terhadap Produktivitas pada Ruang Mesin 2 PT ABC,” J. Tek. Ind., vol. 12, no. 2, pp. 111–116, 2022, doi: 10.25105/jti.v12i2.14716.
[19] A. L. E. Manullang, “Evaluasi Pencahayaan, Kebisingan, Temperatur, dan Getaran pada Line 3 PT South Pasific Viscose,” Ind. Eng. Online J., vol. 4, no. 3, p. 12, 2019.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Kadek Dina Kusuma P, Sinta Dewi (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
