Analisis Penerapan Metode HIRADC Sebagai Upaya Pengendalian Risiko Bahaya Pada Laboratorium Kalibrasi PT XYZ
Keywords:
Hirarki Pengendalian, K3, Laboratorium Kalibrasi, Manajemen Risiko, Metode HIRADCAbstract
PT XYZ as a company engaged in manufacturing and maritime engineering, has a calibration laboratory with various potential hazard risks. Thus, risk control efforts are needed to minimize the negative impact on occupational safety and health (K3). This study aims to evaluate the potential risk of hazards in the Dimensional, Pressure, and Electrical Calibration Laboratory using the Hazard Identification, Risk Assessment, and Determining Control (HIRADC) method at PT XYZ. The data used in this study are primary data conducted in three calibration laboratories at PT XYZ. The identification results show the existence of various potential risks such as skin irritation due to chemicals, health problems due to extreme conditions, and physical fatigue due to improper work positions. Based on the analysis, it was found that the risk level of the electrical calibration laboratory was classified as high risk with 67%, the pressure calibration laboratory was classified as moderate risk with 60%, and the dimensional calibration laboratory was classified as moderate risk with 60% before control. After the implementation of risk control through the control hierarchy, the risk level in several laboratories decreased to low or moderate. The results of this study indicate that the HIRADC method is effective in identifying and controlling hazard risks, as well as the importance of implementing appropriate control measures to increase the risk level.
References
[1] Yanti, G., Zaiuri., & Megasari. "Analisis Penambahan Cocofiber pada Campuran Beton". Seminar Nasional Pakar, vol. 2, 2019.
[2] Sari, D. A. P., dan Sumadi. "Analisis Kelayakan Pengembangan Usaha Kalibrasi PT Indraloka Kabupaten Sukoharjo". Seminar Nasional Pariwisata dan Kewiraushaan (SNPK), Vol 2, pp. 09–216, 2023.
[3] Ramadhani, I dan Rusindiyanto. "Analisis Strategi Soar Dalam Meningkatakan Pemasaran Kalibrasi DI PT. PAL Indonesia". Journal Sains Student Research, 2(1), 530-536, 2024.
[4] Cahyaningrum, D. "Program Keselamatan dan Kesehatan Kerja di Laboratorium Pendidikan". Jurnal Pengelolaan Laboratorium Pendidikan. 2 (1): 35-40, 2020.
[5] Fathmi, R. "Analisis Risiko Bahaya Menggunakan Metode HIRADC Pada Laboratorium Multifungsi Universitas Islam Negeri Ar-Raniry Banda Aceh". UIN -Ar Raniry Repository, 2022.
[6] Fauzi, R. F., Layla & Rois. "Analisis Potensi Risiko Bahaya Keselamatan dan Kesehatan Kerja (K3) pada Laboratorium Teknik Sipil Universitas Muhammadiyah Surakarta Dengan Metode HIRARC". Simposium Nasional RAPI XX – 2021 FT UMS, ISSN 2686-4274, 2021.
[7] Putra, Septian Andika P. "Model Job Safety Analysis Berbasis HIRADC (Hazard Identification, Risk Assesment and Determining Control) Pada Pekerjaan Struktur Proyek Rumah Susun". Tugas Akhir Teknik Sipil, Universitas Islam Indonesia, 2019.
[8] Apriliani, F., dkk. "Analisis Potensi Bahaya dan Penilaian Risiko Keselamatan dan Kesehatan Kerja (K3) pada Bengkel Motor di Kota Bogor". Factory Jurnal Industri, Manajemen Dan Rekayasa Sistem Industri, 2(2), 46-59, 2023.
[9] Abidin. "Penerapan Job Safety Analysis, Pengetahuan Keselamatan dan Kesehatan Kerja terhadap Kejadian Kecelakaan Kerja di Laboratorium Perguruan Tinggi". Jurnal Berkala Kesehatan, 5, (2): 76-80, 2019.
[10] Rahmantiyoko, A., dkk. "Keselamatan dan Keamanan Kerja Laboratorium". Journal of Proceedings Series No. (4) (2019), ISSN (2354-6026), Juli 24 2019.
[11] Pamungkas, G. P. P. "Manajemen Risiko Bahaya Berbasis HIRADC (Hazard Identification, Risk Assesment and Determining Control) Pada Pekerjaan Bore Pile (Studi Kasus : Proyek Gedung Sembilan Lantai Universitas Alma ATA Yogyakarta)". Tugas Akhir Teknik Sipil Universitas Islam Indonesia, 2021.
[12] Sadewa, M. E. B. "Implementasi Keselamatan Dan Kesehatan Kerja (K3) Pada Pekerjaan Pilar Jembatan Menggunakan Metode Hiradc (Implemantation Of Occupational Safety And Health On Bridge Pillar Construction Using Hiradc Method)". Universitas Islam Indonesia, 3 Januari 2022.
[13] Yanda, P., dan Aulia. "Mitigasi Risiko Kegiatan Radiography Test Pada Hygiene Industri PT Sucofindo Duri menggunakan Metode Hazard Identification Risk Assessment and Determining Control (HIRADC)". Universitas Islam Indonesia, 2024.
[14] Sukwika, T., & Pranata, H. D. "Analisis Keselamatan dan Kesehatan Kerja Bidang Freight Forwader Menggunakan Metode HIRADC". Jurnal Teknik, 20(1), 1-13, 2022.
[15] Lazuardi, M. R., Sukwika, T., & Kholil, K. (2022). "Analisis manajemen risiko keselamatan dan kesehatan kerja menggunakan metode HIRADC pada departemen assembly listrik". Journal of Applied Management Research, 2(1), 11-20, 2022.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Achmad Gufron, Rusindiyanto (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
