Implementasi Pengelolaan Limbah Oli pada Pelaku Usaha Bengkel Motor Sebagai Upaya Pengendalian Cemaran Lingkungan di Kota Kendari

Wa Alimuna; La Ode Muhammad Erif -

Authors

Wa Alimuna Institut Agama Islam Negeri Kendari Author
La Ode Muhammad Erif - Universitas Halu Oleo Author

Keywords:

used oil waste, hazardous waste , waste management, motorcycle repair shops, business owner knowledge

Abstract

Used oil waste is one of the most common types of hazardous and toxic waste (B3) generated by motorcycle repair shops. If not properly managed, this waste can contaminate soil, water, and air, and pose health risks to humans. Business owners' knowledge of used oil waste management can influence their ability to implement proper waste management practices. This study aims to determine the knowledge of motorcycle repair shop owners regarding used oil waste management and to what extent they have implemented waste management practices as an effort to control environmental pollution in Kendari City. This research employed a descriptive qualitative approach, with data collected through observation, interviews, and questionnaires, and analyzed using triangulation techniques. The results show that the implementation of used oil waste management has not been optimal and does not fully comply with existing regulations. Although business owners are aware of the environmental impact of used oil waste, they still lack understanding of proper management procedures. Facilities and infrastructure are inadequate, training is limited, there is no specific budget, and supporting documents are unavailable. Generally, small-scale repair shops only collect the used oil before selling it to third parties, who use it as a mixture for asphalt or fuel.

References

[1] Azharuddin, A. A. Sani, and M. A. Ariasya, “Proses Pengolahan Limbah B3 (Oli Bekas) Menjadi Bakar Cair Dengan Perlakuan Panas Yang Konstan,” J. Austenit, vol. 12, no. 2, pp. 48–53, 2020.

[2] A. Azizi and A. R. Pratama Siregar, “Design of Temporary Storage for Hazardous and Toxic Waste in a Rotogravure Cylinder Manufacturing Industry,” J. Serambi Eng., vol. 8, no. 3, pp. 6761–6769, 2023, doi: 10.32672/jse.v8i3.6200.

[3] S. Intan Sekar Arumdani and T. J. Sulistiyani, “Evaluation Of Solid Medical Waste Handling Of Hazardous And Toxic Materials At ‘X’ Educational Hospital In Semarang,” Int. J. Heal. Educ. Soc., vol. 4, no. 4, pp. 19–30, 2021, [Online]. Available: www.ijhes.com

[4] A. Zulfikri, “Implementation of Environmental Law in Handling Hazardous and Toxic Industrial Waste,” Eastasouth Proceeding Humanit. Soc. Sci., vol. 1, no. 01, pp. 13–22, 2023.

[5] A. Aminuddin, M. Z, and A. Romadin, “Analisis Tingkat Pemahaman Dan Penerapan Pengelolaan Limbah B3 Pada Bengkel Motor Di Kota Makassar,” J. Pengendali. Pencemaran Lingkung., vol. 6, no. 2, pp. 42–48, 2024, doi: 10.35970/jppl.v6i2.2319.

[6] V. Azteria and R. A. Gani, “Pengelolaan Limbah Minyak Pelumas Sebagai Upaya Pengendalian Pencemaran Lingkungan,” BIOLINK (Jurnal Biol. Lingkung. Ind. Kesehatan), vol. 6, no. 2, pp. 178–185, 2020, doi: 10.31289/biolink.v6i2.2725.

[7] Y. Monalisa, “Tinjauan Kepatuhan Pengelola Bengkel terhadap Pengelolaan Limbah B3 Oli Bekas pada Bengkel Kendaraan Bermotor Roda Dua di Kecamatan Medan Barat , Kota Medan,” 2024.

[8] A. A. Mekarisce, “Teknik Pemeriksaan Keabsahan Data pada Penelitian Kualitatif di Bidang Kesehatan Masyarakat,” J. Ilm. Kesehat. Masy. Media Komun. Komunitas Kesehat. Masy., vol. 12, no. 3, pp. 145–151, 2020, doi: 10.52022/jikm.v12i3.102.

[9] K. Utari, “Hubungan Ketersediaan Sarana Prasarana Dengan Perilaku Pkl Dalam Penerapan Protokol Kesehatan Covid-19,” J. Kesehat. Ilm. Indones. (Indonesian Heal. Sci. Journal), vol. 7, no. 1, pp. 194–204, 2022, doi: 10.51933/health.v7i1.791.

[10] M. Roto, I. Rupiwardani, and A. Yohanan, “Pengelolaan Limbah Bahan Berbahaya Dan Beracun Khusus Minyak Pelumas (Oli) Bekas Pada Bengkel Motor Di Kota Malang,” J. EnviScience (Environment Sci., vol. 6, no. 2, pp. 160–174, 2022, doi: 10.30736/jev.v6i2.377.

[11] R. N. Azizah, P. Wahyudi, U. Nurjaman, A. N. Jurusan, K. Lingkungan, and P. Kemenkes Bandung, “Gambaran Penanganan Limbah B3 Oli Bekas Kendaraan Bermotor Di Bengkel Wilayah Desa Pasirjambu Kabupaten Bandung,” pp. 1–10, 2024.

[12] F. N. Rakhmawati, S. M.Si, N. D. Kurniasari, and N. Suryandari, “Bengkel Kerja Komunikasi : Upaya Pemberdayaan Mahasiswa Perspektif Manajemen Sumber Daya Manusia,” J. Komun., vol. 10, no. 2, p. 193, 2017, doi: 10.21107/ilkom.v10i2.2524.

[13] M. T. Tarigan, A. P. Namo, G. R. Pratama, S. P. Berutu, and A. H. Lubis, “Analiasis Yuridis Terhadap Tindak Pidana Pengelolaan Limbah B3 Tanpa Izin (Studi Putusan No. 2132K/Pid.Sus-LH/2016),” Leg. J. Huk., vol. 15, no. 1, p. 40, 2023, doi: 10.33087/legalitas.v15i1.420.

[14] K. K. Pavitasari and F. U. Najicha, “Pertanggungjawaban Pihak Ketiga Jasa Pengolah Limbah B3 dalam Mengelola Limbah B3,” Tanjungpura Law J., vol. 6, no. 1, p. 78, 2022, doi: 10.26418/tlj.v6i1.47471.

[15] C. E. R. Tandaju, D. Saerang, and D. Affandi, “Evaluasi Anggaran Sebagai Alat Pengendalian Manajemen Pada Bidang SDM PT. PLN (Persero) Unit Induk Pembangunan Sulawesi Bagian Utara,” J. LPPM Bid. EkoSosBudKum (Ekonomi, Sos. Budaya, dan Hukum), vol. 5, no. 2, p. 424, 2022.

[16] Paparingan, Theodorus Cahyo, et al. "Pengaruh Suhu Proses Terhadap Sintesis Alkyd Resin Dari Daun Kemangi (Ocimum Basilicum) Sebagai Bakal Binder Pembuatan Cat." Jurnal Teknologi Technoscientia (2019): 21-26.

[17] E. W. Siti Amalia Fajriyah, “Evaluasi Pengolahan Limbah Bahan berbahaya dan beracun (B3) di PT X (Jurnal),” Serambi Eng., vol. V, no. 1, 2020.