Redesign Tempat Penyimpanan Sementara Limbah B3 (Sandblasting) pada PT. X di Kecamatan Puloampel Kabupaten Serang-Banten

Authors

  • Agus Ikhsan Muarif Program Studi Teknik Lingkungan Universitas Banten Jaya Author
  • Febrika Pangesti Program Studi Teknik Lingkungan Universitas Banten Jaya Author
  • Ade Ariesmayana Program Studi Teknik Lingkungan Universitas Banten Jaya Author

Keywords:

hazardous and toxic waste, redesign of TPSL B3, sand ex sand blasting

Abstract

 Industrial development in the province of Banten is increasing rapidly, especially the development of the manufacturing industry, so it is possible that the amount of waste generated will increase, especially hazardous waste. PT X is one of the manufacturing companies that produces hazardous waste, from several types of hazardous waste produced, one of which is hazardous waste of sand ex sand blasting. This study aims to determine the amount of generation, evaluate the TPSL B3 Sand Ex Sand Blasting and redesign the TPSL B3 Sand Ex Sand Blasting in accordance with PERMEN LHK NO. 06 TAHUN 2021. The data analysis technique in this research was carried out using a mixed method, namely evaluation of TPSL B3 Pasir Ex Sand Blasting and redesign of TPSL B3 Pasir Ex Sand Blasting in accordance with PERMEN LHK NO. 06 TAHUN 2021. Based on the results of this study, the company needs to make improvements related to how to store hazardous and toxic waste with jumbo bag packaging, which has been determined by the applicable government regulations related to hazardous waste generated, and the company needs to improve the procedures for storing hazardous and toxic waste and redesign TPSL B3 Sand Ex Sand Blasting in order to properly manage the hazardous waste when stored and in accordance with the applicable regulations.

References

[1] KLHK Indonesia, “Permen LHK Nomor 6 Tahun 2021 TentangTata Cara dan Persyaratan Pengelolaan Limbah B3,” Kementrian Lingkung. Hidup dan Kehutan. Republik Indones., 2021.

[2] N. Abdillah and Z. Muhabbah, “Pemanfaatan Limbah Sandblasting Pasir Silika Sebagai Bahan Pengganti Agregat Halus Untuk Campuran Beton,” J. Unitek, vol. 12, no. 1, pp. 10–16, 2020, doi: 10.52072/unitek.v12i1.44.

[3] A. Sillahudin, Qorry Nugrahayu, and Fajri Mulya Iresha, “Evaluasi Dan Inventarisasi Pengelolaan Limbah B3 Di Upt Balai Yasa Pt.Kai Yogyakarta,” no. 30, 2018.

[4] L. Rachman, “Hazardous and toxic waste standard design for temporary storage for oil and gas,” Tecno-Lógica, vol. 25, no. 2, pp. 195–200, 2021, doi: 10.17058/tecnolog.v25i2.16170.

[5] L. Reyzan Afifi, M. L. Ashari, and V. Setiani, “Redesain Tempat Penyimpanan Sementara Limbah B3 Pada Industri Asam Phospat di Kabupaten Gresik,” Conf. Proceeding Waste Treat. Technol., vol. 1, no. 1, pp. 27–30, 2018.

[6] H. Risqullah and I. Dirja, “Proses Sandblasting Dalam Proses Fabrikasi Baja Struktur Pada Proyek Refinery Development Master Plan (RDMP) di PT AJP,” J. Ilm. Wahana Pendidik., vol. 8, no. 15, pp. 264–275, 2022.

[7] E. Sulistyo and P. H. Setyarini, “Pengaruh Waktu Dan Sudut Penyemprotan Pada Proses Sand Blasting Terhadap Laju Korosi Hasil Pengecatan Baja AISI 430,” J. Rekayasa Mesin, vol. 2, no. 3, pp. 205–208, 2011.

[8] Uddin, MD Jalal. "Journal and conference paper on (environment) e-waste management." IOSR J Mech Civ Eng 2 (2012): 25-45.

[9] S. N. Wildaniand, “Studi Awal Pemanfaatan Limbah Sandblasting sebagai Koagulan,” Tek. Lingkung., vol. 16, no. 1, pp. 93–102, 2010.

[10] P. D. Yanti and P. S. A. Sitogasa, “Redesain Tempat Pengelolaan Sampah Terpadu Pada Proyek Pembangunan Rumah Susun X Di Kota Y,” J. Penelit. Rumpun Ilmu Tek., vol. 3, no. 1, pp. 65–76, 2024.

[11] Kepala Badan Pengendalian Dampak Lingkungan, “Keputusan Kepala Bapedal No . 1 Tahun 1995 Tentang : Tata Cara Dan Persyaratan Teknis Penyimpanan Dan Pengumpulan Limbah Bahan,” Keputusan Kepala Bapedal No .1 Tahun 1995 Tentang Tata Cara Dan Persyaratan Tek. Penyimpanan Dan Pengumpulan Limbah Bahan, no. 1, pp. 31–54, 1995.

[12] Kementerian Ketenagakerjaan Republik Indonesia, “Permennakertrans no : 04/MEN/1980 tentang Syarat-Syarat Pemasangan dan Pemeliharaan Alat Pemadam Api Ringan,” vol. 1, no. 1, pp. 1–15, 1980.

[13] Standar Nasional Indonesia, “Tata Cara Perancangan Sistem Ventilasi dan Pengkondisian Udara pada Bangunan Gedung,” Sni 03 - 6572 - 2001, pp. 1–55, 2001.

[14] R. Wisdayana, F. Sri, P. Pangesti, and A. Ariesmayana, “Redesain Tempat Penyimpanan Sementara Limbah B3 di Workshop PT. Purna Baja Harsco,” Serambi Eng., vol. VII, no. 2, pp. 3102–3111, 2022.

[15] B. S. N. Standar Nasional Indonesia, “SNI 03-6575-2001 tentang Tata Cara Perancangan Sistem Pencahayaan Buatan pada Bangunan Gedung,” SNI 03-6575-2001 tentang Tata Cara Peranc. Sist. Pencahayaan Buatan pada Bangunan Gedung, pp. 1–32, 2001.

Downloads

Published

30/09/2024

How to Cite

[1]
“Redesign Tempat Penyimpanan Sementara Limbah B3 (Sandblasting) pada PT. X di Kecamatan Puloampel Kabupaten Serang-Banten”, jse, vol. 9, no. 4, Sep. 2024, Accessed: Dec. 12, 2024. [Online]. Available: https://jse.serambimekkah.id/index.php/jse/article/view/502

Similar Articles

1-10 of 156

You may also start an advanced similarity search for this article.